Marco

5 Ft. Pneumatic Twinline Hose - 3/16" Fittings

1/2" ID x 10 Ft. Black Heavy-Duty Abrasive Blasting Hose with 10L174

Allredi 155E Remote Control Switch utilizes a toggle switch to activate and deactivate the blast pot. This is a permanently sealed remote control switch to keep dust and debris from entering the...

#7 Alloy Poly TC Wide NPS Nozzle

#6 (3/8") Short Venturi Nozzle, polyurethane jacket, tungsten carbide liner, 1" entry with 1-1/4" NPS threads Short Venturi Nozzle #6 - 3/8" orifice 1" entry with 1-1/4" NPS threads...

#7 (7/16") Short Venturi Nozzle, polyurethane jacket, tungsten carbide liner, 1" entry with 1-1/4" NPS threads Short Venturi Nozzle #7 - 7/16" orifice 1" entry with 1-1/4" NPS threads...

Filler Plug O-Ring for .15 - 6.0 Cu. Ft. Abrasive Blasting Pots  

This repair kit fits both the 1-1/4" & 1-1/2" GateKeeper Air Valves. This kit includes the nuts, gaskets and o-rings, and diaphragm. See part numbers and schmatics guide for a full list of part...

Size 3 aluminum nozzle holder for 2-5/32" OD blast hose. For 1-1/4" threaded nozzles. Size 3 Fits 2-5/32" OD blast hose For 1-1/4" threaded nozzles Aluminum body Use 10NW nozzle washer

1-1/2" ID Industrial Air Hose coupled with two 4-lug couplings. 1-1/2" ID x 2" OD 50' Length 200 PSI Pressure Rating Coupled with two 10HE4 4-lug couplings Red Cover Synthetic Spiral...

Venturi Nozzle Conversion Kit  

The 1-1/2” inlet valve allows a larger volume of air to flow into the blasting system. The Allredi 1-1/2" Inlet Valve is a component part in the 125P and 125E Remote Control Systems. 1-1/2"...

3.5 Cu. Ft M-Series Blast Pot, Hose & Nozzle Package

Valve Spindle for Blastmaster® 153 Remote Control Valve  

Barricade CO Monitor 12-Volt DC Kit

Nozzle washers for 3/4" entry nozzles. Sold 10/package. 3/4" gasket ID 10/package

1-1/4" ID heavy duty blast hose with 5/16" inner tube for strength and durability. This 50' section is uncoupled.  1-1/4" ID x 2-5/32" OD 50' Uncoupled 5/16" liner thickness 150 PSI working...

#8 Tungsten carbide all poly long venturi blast nozzle. #8 - 1/2" orifice 1" entry with 1-1/4" NPS thread Polyurethane jacket and threads Tungsten carbide liner 9" length Documents: Blast...

1/4" female nut & barb for twinline hoses 1/4" female nut & barb Used for the 1/4" ID air hose in 1/4" x 1/8" twinline hose

6" Funnel with Screen (for .20/.35 Cu. Ft. Abrasive Blasting Pot)  

Star Washer for Blastmaster® 153 Remote Control Valve

1-1/2" Maxum III Abrasive Metering Valve with Tungsten Carbide Sleeve  

#7 Silicon carbide all poly long venturi blast nozzle with 50MM thread. #7 - 7/16" orifice 1-1/4" entry with 50MM thread Lightweight all polyurethane jacket and threads Silicon carbide liner 8"...

1-1/2" Maxum Abrasive Metering Valve with Tungsten Carbide Sleeve

Pop-up valve with female external sleeve. Black rubber body, seats with Pop-Up Valve Seat (1006050). Pop-Up Valve, External Black Rubber Body    

1/4" ID x 50' Airless Spray Hose, 3600 PSI with female x female fittings. 1/4" ID x 50' Airless Spray Hose 3600 PSI working pressure Female x Female couplings installed Polyester braid...

Hose Clamp - 1/2" ID Abrasive Blasting Hose  

Male Air Hose Coupling for 2" ID Air Hose, 4-lug For 2" ID air hose 4-lug Male style

Replacement Toggle Boot for 155E, 156E, and 158P Remote Control Switches Toggle Boot Fits 155E, 156E, and 158P Remote Control Switches Documents: Allredi 155E Remote Control Switch - Part...

#4 Straight bore blast nozzle. #4 - 1/4" orifice 1/2" entry with 3/4" NPS thread Steel jacket and threads Tungsten carbide liner 1-3/4" length Documents: Blast Nozzles - Part Numbers and...

Size 4 nylon coupling for 2-3/8" OD blast hose. Standard size 2-lug style. Size 4 Fits 2-3/8" OD blast hose Standard 2-lug Nylon body Uses 10SBGNY2 gasket

#6 Tungsten carbide all poly long venturi blast nozzle with 50MM thread. #6 - 3/8" orifice 1-1/4" entry with 50MM thread Polyurethane Jacket and threads Tungsten carbide liner 6-3/4" length Blast...

Control Link for 1.0/1.5 Cu. Ft. Machine

1-1/2" blast pot pusher line assembly with two 1-1/2" female swivels, two 1-1/2" T-bolt hose clamps, and 3' x 1-1/2" ID air hose. For 6.5 cu ft and smaller blast pots with a 1-1/2" pipe string. ...

Cover Bolt with Pin for 2- and 4-Hole Jr.  

308 LED blast light 25' 16/2 & Power Pack

Jr./Sr. Spindle Bolt

#3 Brass Poly TC NPS Nozzle - 3/16"

Allredi 300 Hose-Mounted Light with 6' of 14/2 cord, no power supply Allredi 300 Hose-Mounted Light 6' of 14/2 SEOW cord No power supply Documents: Allredi 300 Series Hose-Mounted Light -...

The 1” Outlet Valve allows the blast pot to depressurize when the remote control switch is released. This Outlet Valve is a component part in the 125P and 125E Remote Control Systems. 1"...