Marco

#6 Quicksilver DV NPS Nozzle 3/8"

Internal parts service kit for Allredi 2-Hole Junior Mixing Valve. Includes Valve Cover (10L100082) and complete service kit (10L336A) with washers, gaskets, spindles, and springs. See part numbers...

2" NPT Aluminum Tank Coupling, Tapered Threads, Oversized Lugs 2" NPT aluminum tank coupling Tapered threads Oversized lugs

1" ID heavy duty blast hose with 5/16" inner tube for strength and durability. This uncoupled hose is sold per foot for easy customization.  1" ID x 1-7/8" OD Sold per foot Uncoupled 5/16"...

Internal valve plate for Allredi 2-Hole Junior Mixing Valve Valve Plate for Allredi 2-Hole Junior Mixing Valve Documents: Allredi 2-Hole Junior Mixing Valve - Part Numbers & Schematics...

Service kit for Allredi 2-Hole Junior Mixing Valve. Complete service kit (10L336A) with washers, gaskets, spindles, and springs. Does not include valve plate. See part numbers and schematics guide...

1" ID super-flex blast hose with 1/8" inner tube for flexibility and reduced weight. This hose is uncoupled. 1" ID x 1-1/2" OD 50' section Uncoupled 1/8" liner thickness 175 PSI working...

Nipple 8" X 1-1/4" Male NPT for Maxum Abrasive Metering Valve  

#8 Stealth Short-V NPS Nozzle 1/2"

1/4" ID x 25' Airless Spray Hose, 3600 PSI with female x female fittings. 1/4" ID x 25' Airless Spray Hose 3600 PSI working pressure Female x Female couplings installed Polyester braid...

The Barricade 286 6-outlet Airline Filter removes moisture, oil, odor, particulates, and organic vapors from compressed air and can be used as a component of a supplied-air...

3/8" Lock Washer Galvanized

#6 Silicon carbide all poly long venturi blast nozzle with 50MM thread. #6 - 3/8" orifice 1-1/4" entry with 50MM thread Lightweight all polyurethane jacket and threads Silicon carbide liner 7"...

Pop-up valve with male internal sleeve. Orange rubber body, seats with Pop-Up Valve Seat (1006040) Pop-Up Valve, Internal Orange Rubber Body

#4 Ceramic type 1 blast nozzle with premium grade alumina ceramic #4 - 1/4" orifice 5/8" entry Premium grade alumina ceramic Type 1 3-3/4" length Documents: Blast Nozzles - Part Numbers and...

K-Series Abrasive Metering Valve – Complete  

The Allredi 152P Remote Control Switch has a lightweight, durable aluminum body that utilizes a spring loaded safety tab and broad handle. This is a red switch with a repairable design and every...

Hose Clamp - 3/4" ID Abrasive Blasting Hose  

Valve Cover Gasket for 2 and 4 Hole Jr.

The GateKeeper Air Valve activates and deactivates the flow of compressed air without depressurizing the blast pot. The 1-1/2" GateKeeper Air Valve is a component part of the pressure-hold 130P and...

1-1/2" Bantam Abrasive Metering Valve  

3/8" x 50' section of fluid hose, coupled with two 3/8" compression x 3/8" female NPS fittings 3/8" ID x 11/16" OD 50' length Coupled with two 2080020 3/8" compression x 3/8" female NPS fittings...

#5 Straight bore blast nozzle. #5 - 5/16" orifice 1/2" entry with 3/4" NPS thread Steel jacket and threads Tungsten carbide liner 1-3/4" length Blast Nozzles - Part Numbers and Schematics Guide -...

Service kit for Allredi 1-1/2" Inlet Valve. Includes o-rings, inner spring, bottom cap gasket, outer spring, and two plug washers. Service Kit for Allredi 1-1/2" Inlet Valve Documents: ...

1-1/2" NPT Aluminum Tank Coupling, Tapered Threads, Oversized Lugs 1-1/2" NPT aluminum tank coupling Tapered threads Oversized lugs

Heavy-gauge steel blast pot lid for keeping rain and debris out of blast pots with 24" tops. Includes one handle. 24" Blast Pot Lid Steel One Handle

1-1/4" Heavy-Duty Threads Aluminum Nozzle Holder  

#3 Alloy Poly TC NPS Nozzle 3/16"

The Barricade Carbon Monoxide Monitor uses audio and visual alarms to notify operators when CO levels exceed the allowable level. The Barricade Carbon Monoxide Monitor is a...

A blast pot exhaust muffler reduces the noise and traps particles generated during the depressurization process of a blast pot. Blast Pot Exhaust Muffler Aluminum body Steel Mesh Screen HDPE...

1/8" female nut & barb for twinline hoses. This part is used to connect the 1/8" threaded leg of twinline with 1/4" and 1/8" fittings. All twinline hose has a 3/16" ID. 1/8" female nut &...

Allredi 301 Hose-Mounted Light with 6' of 14/2 SEOW cord. The 301 light uses a 35-watt halogen bulb and is air-cooled using a 1/4" ID air hose (not included). This is a replacement light and does...

Handle Grip for Blastmaster® 153 Remote Control Valve

Aluminum replacement handle for the Allredi 150P and 151E Remote Control Switches Replacement Handle Fits Allredi 150P & 151E Remote Control Switch Documents: Allredi 150P Remote Control...

Size 1 brass coupling for 1-1/2" OD blast hose. Standard size 2-lug style. Size 1 Fits 1-1/2" OD blast hose Standard 2-lugs style Brass body Use 10SBG or 10USBG gaskets

Ultralite Blast Suit, size 3X-Large. The Ultralite Blast Suit is a durable, light-weight coverall designed specifically for abrasive blasting environments where mineral, slag, and other non-ferrous...

Size 1 brass nozzle holder for 1-1/2" OD blast hose. Fits 1-1/4" nozzle thread style. Size 1 Fits 1-1/2" OD blast hose For 1-1/4" thread style Use 10NW nozzle washer Brass material

#4 Tungsten carbide brass poly long venturi blast nozzle. #4 - 1/4" orifice 1" entry with 1-1/4" NPS brass thread Impact absorbing polyurethane Jacket Tungsten carbide liner 5-1/4" length ...

2-lug threaded end coupling with 3/4" male threads for connecting equipment to a hose. 2-lug 3/4" male thread size Plated iron Uses 10UG2 rubber gasket

#5 Tungsten carbide brass poly long venturi blast nozzle. #5 - 5/16" orifice 1" entry with 1-1/4" NPS brass thread Impact absorbing polyurethane Jacket Tungsten carbide liner 5-3/4" length ...