Marco

1/2" Flat Washer for 0.35 Cu. Ft. Axle Assembly  

1-1/2" NPT Brass Tank Coupling, Tapered Threads 1-1/2" NPT brass tank coupling Tapered threads Standard lugs

Ultralite Blast Suit, size large. The Ultralite Blast Suit is a durable, light-weight coverall designed specifically for abrasive blasting environments where mineral, slag, and other non-ferrous...

10" Abrasive Blasting Pot Funnel with Screen  

55 Ft. Pneumatic Twinline Hose - 1/4" X 1/8" Fittings

1-1/2" Nipple for Bantam Abrasive Metering Valve  

Replacement screen for the Allredi Abraive Trap. The screen traps the small particles escaping the blast pot during depressurization and prolongs the life of the abrasive trap body. Abrasive Trap...

Spindle E Clip for Blastmaster® 153 Remote Control Valve  

#8 tungsten carbide brass poly long venturi blast nozzle #8 - 1/2" orifice 1" entry with 1-1/4" NPS brass thread Impact absorbing polyurethane jacket Tungsten carbide liner 8-3/4" length ...

The Allredi 151E Remote Control Switch has a lightweight, durable aluminum body that utilizes a spring loaded safety tab and broad handle. This is a repairable design with every part available. This...

Cover Gasket for Blastmaster® 153 Remote Control Valve  

Size #4, 45° three outlet angle nozzle with tungsten carbide liner and brass threads. #4 - 1/4" orifice, three outlet 1" entry with 1-1/4" NPS brass threads Tungsten carbide liner 3-1/2"...

Size 4 brass nozzle holder for 2-3/8" OD blast hose. Fits 1-1/4" nozzle thread style. Size 4 Fits 2-3/8" OD blast hose For 1-1/4" nozzle thread style Brass body Use 10NW nozzle washer

#5 All Poly TC Wide HD Thrd Nozzle - 5/16"

Frosted Bulb for Galaxy 307 Hose-Mountable Blast Light – 20 Watt

Valve Spring for 2- and 4-Hole Jr.  

3/8" ID x 50' Airless Spray Hose, 3500 PSI with female x female fittings. 3/8" ID x 50' Airless Spray Hose 3500 PSI working pressure Female x Female couplings installed Steel braid reinforcement...

Control Lever Grip - All  

Tungsten Service Kit - Maxum and Maxum III Abrasive Metering Valves  

Nut for Spring Bolt for Blastmaster® 153 Remote Control Valve

Valve Spindle for 2- or 4-Hole Jr.  

Aluminum quick-disconnect blast hose coupling for 1/2" ID blast hoses with 1-3/16" OD.  Fits 1/2" ID x 1-3/16" OD blast hose Standard 2-lug  Aluminum body Use 10SBG or 10USBG...

1.0 Cu. Ft. Blast Pot, Hose & Nozzle Package

#6 Silicon carbide all poly long venturi blast nozzle. #6 - 3/8" orifice 1" entry with 1-1/4" NPS thread Lightweight all polyurethane jacket and threads Silicon carbide liner 7" length ...

Leather Blast Suit, size x-large. The Leather Blast Suit is designed to endure the roughest environements and is a popular choice when working in tight spaces, cold weather, and environments where...

1-1/4" NPS Brass Tank Coupling, Straight Threads 1-1/4" NPS brass tank coupling Straight threads Standard lugs

1-1/4" ID super-flex uncoupled blast hose with 1/4" inner tube for flexibility and reduced weight. This is a 100' section for longer runs.  1-1/4" ID x 1-7/8" OD 100' length Uncoupled 1/4"...

The Barricade 286 Airline Filter removes moisture, oil, odor, particulates, and organic vapors from compressed air and can be used as a component of a supplied-air respiratory system...

Pop-up Valve Seat is a black rubber o-ring that is used with pop-up valves inside of blast pots for forming a seal and allowing the blast pot to pressurize. Pop-Up Valve Seat Black Rubber O-Ring

110 Ft. Pneumatic Twinline Hose - 1/4" X 1/8" Fittings

1-1/4" Nipple for Bantam Abrasive Metering Valve  

Size 4 brass coupling for 2-3/8" OD blast hose. Standard size 2-lug style. Size 4 Fits 2-3/8" OD blast hose Standard 2-lug Brass body Uses 10SBG or 10USBG

The complete service kit for the Allredi 153 Remote Control Valve includes washers, o-rings, screws, stems, and the shut off arm. See part numbers and schematics guide for a complete list of part...

#5 Alloy Poly TC Wide NPS Nozzle

Viper Remote Control Valve  

An Abrasive Trap filters small abrasive particles exhausting from the blast pot, protecting the outlet valve from premature wear. The Allredi Abrasive Trap is a component part in the 125P and 125E...

#7 Silvertip TC Wide Entry Nozzle - 7/16"

Cord Clamp for Blastmaster® 151 Remote Control Switch

Socket Head Cap Screw 10-32 X 3/8”

3/8" ID fluid hose, uncoupled, sold per foot 3/8" ID x 11/16" OD fluid hose Sold per foot Uncoupled 750 PSI working pressure Black cover