Mfg. Catalogs

2" MPT X 1/2" FPT Bronze Hex Bushing- Lead Free 2″ male pipe threads x 1/2″ female pipe threads. Cast bronze. Max working pressure= 125 PSI steam pressure (W.S.P). 200PSI nonshock cold water, oil or gas (W.O.G.) Materials meet ASTM B 584-93B...

2" MPT X 2-1/2" THREADED RED BRASS NIPPLE 2″ MALE PIPE THREADS, 2-1/2″ LENGTH, RED BRASS  

2" MPT X 3" THREADED RED BRASS NIPPLE 2″ MALE PIPE THREADS, 3″ LENGTH, RED BRASS  

2" MPT X 3-1/2" THREADED RED BRASS NIPPLE 2″ MALE PIPE THREADS, 3-1/2″ LENGTH, RED BRASS  

2" MPT X 3/4" FPT Bronze Hex Bushing- Lead Free 2″ male pipe threads x 3/4″ female pipe threads. Cast bronze. Max working pressure= 125 PSI steam pressure (W.S.P). 200PSI nonshock cold water, oil or gas (W.O.G.) Materials meet ASTM B 584-93B...

2" MPT X 4-1/2" THREADED RED BRASS NIPPLE 2″ MALE PIPE THREADS, 4-1/2″ LENGTH, RED BRASS  

2" MPT X 5" THREADED RED BRASS NIPPLE 2″ MALE PIPE THREADS, 5″ LENGTH, RED BRASS  

2" MPT X 5-1/2" THREADED RED BRASS NIPPLE 2″ MALE PIPE THREADS, 5-1/2″ LENGTH, RED BRASS  

2" MPT X 6" THREADED RED BRASS NIPPLE 2″ MALE PIPE THREADS, 6″ LENGTH, RED BRASS  

2" No Caulk (MJ) Cast Iron Drain Base for 3-1/2" Spud (7" Pan) 2″ No Caulk mechanical joint connection. 7″ Pan diameter. 1/2″ primer tapped. Stainless steel bolts. Test plug included. Fits 3-1/2″ spud. With clamping ring.  

2" No Hub Cast Iron Backwater Valve Fits no hub or plastic pipe. 14-1/2″ length. Reduces backflow in drainage system. All neoprene gaskets. 300 series stainless bolts and washers. Repairable in service.  

2" No Hub Cast Iron Bolt Down Drain w/ Cast Chrome Plated Strainer 2″ NO HUB CONNECTION. 6-1/2″ DIAMETER PAN. CAST IRON BOLT DOWN CLAMP RING FOR USE WITH NON LEAD PAN LINER. CLAMP RING HAS SEEPAGE GROOVES ON THE UNDERSIDE. COMES WITH CHROME...

2" No Hub Cast Iron Bolt Down Drain w/ S.S. Strainer 2″ NO HUB CONNECTION. 6-1/2″ DIAMETER PAN. CAST IRON BOLT DOWN CLAMP RING FOR USE WITH NON LEAD PAN LINER. CLAMP RING HAS SEEPAGE GROOVES ON THE UNDERSIDE. COMES WITH STAINLESS STEEL...

2" No Hub Cast Iron Drain Base for 3-1/2" Spud (7" Pan) 2″ No Hub connection. 7″ pan diameter. 1/2″ primer tapped. Stainless steel bolts. Fits 3-1/2″ spud. With clamping ring.  

2" No Hub Cast Iron Shower Drain w/ Clamping Ring Cast Strainer 2″ No Hub connection. Comes with brass threaded clamping ring, 7″ pan w/ chrome plated brass spud and stamped stainless steel strainer.  

2" No Hub Cast Iron Slab Drain Base for 3-1/2" Spud (7" Pan) 2″ No Hub connection. 7″ pan diameter. 1/2″ primer tapped w/ brass plug. Stainless steel bolts. Fits 3-1/2″ spud. Less clamping ring.  

2" No-hub Cast Iron White Porcelain Floor Sink Less Grate 12″Lx12″Wx6″D. White porcelain coated cast iron. Aluminum dome bottom strainer included.  

2" No-Hub Coupling No-hub couplings are used to join no-hub cast iron soil pipe and fittings. Made in accordance with Cast Iron Soil Pipe Institute Standard (CISPI) #310. Couplings are shipped as assemble units. Stainless steel corrugated shield and...

2″ No-Hub Dandy Tee With Plug    

2″ Nylon Slip Joint Wash Design Features: Available in: Rubber Construction Nylon Construction "Premium” Silicon Rubber Construction Domestic Print / View Specs PDF

1 1/4 OD Chrome Plated Box Escutcheon Design Features: Steel Construction Chrome-Plated Imported Print / View Specs PDF

2" Offset Fiberglass Shower Stall Drain WHITE PVC. FITS 2″ DWV PIPE.  

2″ Plain-End Anodeless Riser (90 Degree)

2" Plastic Fitting Saver Tool Repairs sockets/hubs of PVC, ABS, DWV pipe, fittings, and PVC ball valves below slab or sub floor.  

2" Plastic Nipple Caddy Tray 23-1/2″ X 8-1/2″ DIMENSIONS. HOLDS 27 NIPPLES. MADE OF HIGH IMPACT PLASTIC. WILL NOT RUST OR CORRODE. STRONG ENOUGH TO TAKE THE ABUSE YET ONE-HALF THE WEIGHT OF METAL.  

2" Pneumatic Clean-out Test Tee Plug Designed for testing plumbing lines above the cleanout tee. Design of plug will allow for passing of test water or air by deflating the plug. Threads directly into test tee. Threads into both cast iron and plastic...

2″ Polypropylene Termination Screen      

2″ Pro PVC Replacement Blade      

2″ PVC 2-Hole Pipe Straps      

2″ PVC Backwater Valve

2″ PVC Cleanout Plug With Screw      

2″ PVC Coated DWV Hanger Design Features: Steel Construction Steel Construction Domestic Print / View Specs PDF Operating Specifications:Temperature Max: 150° FMax Rec Load: 150 lbs.Tensile Strength: 2400Elongation %: 375

2″ PVC Countersunk Cleanout Plug      

2" PVC Floor Drain and Trap w/ Cleanout Solvent weld 2″ DWV connection. 1-1/2″ concealed cleanout 1-1/2″ plug. Drain includes PVC strainer.  

2″ PVC General Purpose Drain Design Features: Grid Stainless Steel Construction 22 Circular Hole Grid .4” Diameter Outer Holes 3” Diameter Inner Holes PVC Base Imported Print / View Specs PDF

2" PVC Heavy Duty Pipe Cutter Cuts up to 2″ PVC pipe. Durable all metal construction. One of the best pipe cutters on the market. molybdenum vanadium stainless steel blade. All components are replaceable.  

2" PVC No-Caulk Shower Drain w/ Stainless Steel Snap-in Strainer Compression gasket type. No glue necessary. Quick installation. Designed for fiberglass shower stalls. Fits schedule 40 plastic or cast iron pipe. 4-1/4″ stainless steel snap-in...

2″ PVC Shower Drain – Solvent With SS Grid Design Features: Grid Available in PVC or Steel 18 Square Hole Grid 3/8” x 3/8” Square Holes 1/8” Between Holes PVC Base Imported Print / View Specs PDF      

2″ PVC Shower Drain, SS Grid & Jiffy Joint Design Features: • Grid• Available in PVC or Steel• 18 Square Hole Grid• 3/8” x 3/8” Square Holes• 1/8” Between Holes• PVC Base• Imported Print /...

2" PVC Shower Stall Drain w/ Receptor Base -Stainless Steel Strainer Fits 2″ DWV Pipe w/ 4-1/4″ outside diameter 2-5/8″ Screw hole to screw hole. Fits all standard fiberglass / acrylic shower stall base. Polished stainless steel...