Mfg. Catalogs

2″ Garlock 3000 Ring Gasket Strainer      

2″ Gas Regulator Vent Square Vent Design Features: Non-Corrosive Aluminum Construction 16” x 16”, .0018 Gauge ScreenScreen Designed to Blow-Out in Reliefif the Screen becomes Blocked Circular Vent Design Features: Galvanized...

2″ Gas Test Kit- 100 PSI Design Features: Uses a Standard Gauge withthe following Features: 1/4” NPT Lower Connection Black Steel Case Also Includes the Following: Hexagonal Test Block 3/4” FIP Brass-Plated Manifold 1/8” Air...

2″ Gas Test Kit- 15 PSI      

2″ Gas Test Kit- 30 PSI Design Features: Uses a Standard Gauge withthe following Features: 1/4” NPT Lower Connection Black Steel Case Also Includes the Following: Hexagonal Test Block 3/4” FIP Brass-Plated Manifold 1/8” Air Valve...

2″ Gas Test Kit- 60 PSI Design Features: Uses a Standard Gauge withthe following Features: 1/4” NPT Lower Connection Black Steel Case Also Includes the Following: Hexagonal Test Block 3/4” FIP Brass-Plated Manifold 1/8” Air Valve...

2″ Gray Schedule 80 PVC Termination Screen        

2" Heavy Plastic Test Plug with Metal Bolt and Wing Nut WITH METAL BOLT AND WING NUT. HEAVY PLASTIC FLANGES WITH MOLDED RUBBER GASKETS. FITS BOTH CAST IRON AND PVC PIPE.  

2″ Hinged Steel Pipe Clamp Design Features: 1/16” Steel Construction Zinc Dichromate Finish 1/8” Rubber Gasket Includes 2 Bolts with Nuts Imported Print / View Specs PDF

2" Hub PVC Floor Sink Base Only (less strainer/grate)

2" Hub PVC Floor Sink w/ 3/4" Grate Dome Strainer

2" Hub PVC Floor Sink w/ 3/4" Grate Flat Strainer

2" Hub PVC Floor Sink w/ Full Grate Dome Strainer

2" Hub PVC Floor Sink w/ Full Grate Flat Strainer

2″ Inflatable Test Ball Design Features: Can Conform to Irregular Pipe Sizes 3 Year Warranty Domestic Print / View Specs PDF Operating Specifications:Max Back Pressure:Water Head: 30’ Air: 13 psig Use: For testing pipelines or totemporarily...

2" Inside Caulk Cast Brass Floor Drain w/ S.S. Stamped Strainer FOR USE IN AREAS WHERE A PAN LINER IS NOT REQUIRED. COMES WITH A STAINLESS STEEL SCREW IN STRAINER.  

2" Inside Caulk Cast Brass Shower Drain w/ Snap-in Strainer WITHOUT GASKET. FITS 2″ CAST IRON AND SCHEDULE 40 PIPE. COMES WITH 4-1/4″ OD STAINLESS STEEL SNAP IN STRAINER. FOR USE WITH FIBERGLASS OR ACRYLIC SHOWERS.  

2" Inside Caulk Cast Iron Bolt Down Drain w/ S.S. Strainer 2″ INSIDE CAULK CONNECTION . 6-1/2″ DIAMETER PAN. CAST IRON BOLT DOWN CLAMP RING FOR USE WITH NON LEAD PAN LINER. CLAMP RING HAS SEEPAGE GROOVES ON THE UNDERSIDE. INSIDE CAULK UNIT...

2" Inside Caulk Cast Iron Bolt Down Shower Drain w/ Cast Strainer- Chrome Plated 2″ INSIDE CAULK CONNECTION. 6-1/2″ DIAMETER PAN. CAST IRON BOLT DOWN CLAMP RING FOR USE WITH NON LEAD PAN LINER. CLAMP RING HAS SEEPAGE GROOVES ON THE UNDERSIDE...

2" Inside Caulk Cast Iron Shower Drain w/ Clamping Ring Cast Strainer 2″ Inside Caulk connection. Comes with brass threaded clamping ring, 7″ pan w/ chrome plated brass spud and stamped stainless steel strainer.  

2″ IP White Plastic Floor & Ceiling Plate      

2″ IPS Anodeless Riser – Poly Plain-end SDR-11 Poly-End Anodeless Gas Meter Risers Anodeless Design For Underground PE Pipe (ASTM D 2513) Only Corrosion Resident Fusion Bonded Epoxy Coating Yellow Medium Density Polyethylene - PE2406 Made in...

2″ IPS Anodeless Riser with Con-Stab SDR-11 Con-Stab® Anodeless Gas Meter Risers Anodeless Design For Underground PE Pipe (ASTM D 2513) Only Continental’s Patented “ID Seal” Yellow Medium Density Polyethylene - PE2406 Made in...

2" IPS Asbestos Free Full Face Gasket 1/16" Thick FITS 2″ IRON PIPE. ASBESTOS FREE FULL FACE GASKET MEETS ASTM F152, F36A, F146, 1/16″ THICK. 150 LBS. MAY BE USED FOR STEAM APPLICATIONS.  

2" IPS Asbestos Free Ring Gasket FITS 2″ IRON PIPE. ASBESTOS FREE RING GASKET MEETS ASTM F152, F36A, F146, 1/16″ THICK. 150 LBS. MAY BE USED FOR STEAM APPLICATIONS.  

2" IPS BRASS URINAL DRAIN WITH CHROME PLATED STRAINER 4-1/4″ OD  

2" IPS Cast Brass Shower Drain w/ Stainless Strainer Designed for use with prefab/fiberglass shower stalls. Comes with 4-1/4″ OD snap-in stainless steel strainer. Fits 2″ Iron Pipe Threads. A gasket can be used to make a no-caulk connection...

2" IPS Cast Iron Bolt Down Drain w/ S.S. Strainer FITS 2″ IRON PIPE SIZE. 6-1/2″ DIAMETER PAN. CAST IRON BOLT DOWN CLAMP RING FOR USE WITH NON LEAD PAN LINER. CLAMP RING HAS SEEPAGE GROOVES ON THE UNDERSIDE. INSIDE CAULK UNIT MAY BE USED...

2" IPS Cast Iron Bolt Down Drainer w/ Chrome Plated Cast Strainer Fits 2″ iron pipe size 6-1/2″ diameter pan. Cast iron bolt down clamp ring. For use with non-lead pan liner. Clamp ring has seepage grooves on the underside. Comes with chrome...

2" IPS Cast Iron Shower Drain w/ Threaded Brass Clamping Ring Cast Strainer 2″ Iron Pipe Size. Comes with brass threaded clamping ring, 7″ pan w/ chrome plated brass spud and stamped stainless steel strainer.  

  Print / View Specs PDF      

  Print / View Specs PDF      

2″ IPS Compression Gas Service Riser Design Features: Steel Construction Fusion Epoxy Coated Nut Bottoms Out When Fully Secure:No Need for Special Training or Torque Tools Domestic Print / View Specs PDF Operating Specifications:Pressure: 10...

2″ IPS Con-Stab Coupling SDR-11 Design Features: Continental’s Patented “ID Seal” For Underground PE Pipe (ASTM D 2513) Only Made in the USA Print / View Specs PDF Operating Specifications:Temperature: -20° to 140°...

2″ IPS Con-Stab Elbow SDR-11 Design Features: Continental’s Patented “ID Seal” For Underground PE Pipe (ASTM D 2513) Only Made in the USA For Print / View Specs PDF Operating Specifications:Temperature: -20° to 140°...

2″ IPS Con-Stab Tee SDR-11 Design Features: Continental’s Patented “ID Seal” For Underground PE Pipe (ASTM D 2513) Only Made in the USA Print / View Specs PDF Operating Specifications:Temperature: -20° to 140° FPressure:...

2″ IPS Conbraco Ball-Cone Check Valve

2″ IPS Extra Long Brass Urinal/Shower Strainer Design Features: Grid Stainless Steel Construction 37 Square Holes .25” x .25” Square holes .15” Betweem Holes Brass Base Imported Use: For use on extra-thick mud/tile jobs. Print /...

2″ IPS Floor & Ceiling Plate Less Spring Design Features: Steel Construction Chrome Finish Imported Print / View Specs PDF  

2″ IPS Floor & Ceiling Plate With Spring Design Features: Steel Construction Chrome Finish Includes Tension Spring Split for Ease of Installation Imported Print / View Specs PDF