Argco

Universal High Speed Steel Threading Dies Cross Reference: 47765 Money back guarantee on all of ARGCO's pipe threading tools. NPT Right hand threads that fit a RIDGID® ® pipe threader. ...

PT 44815 Brush Set fits RIDGID® 700 Hand Held Power Drive Cross Reference 44815 Brush Assembly (2) Click here for Parts Breakdown (PDF)RIDGID® is a registered trademark of RIDGID, Inc. ARGCO is not an authorized...

Keep threading oil & chips in the oiler and off the walls and floor. Easily attaches to RIDGID® 300 Threader RIDGID® is a registered trademark of RIDGID®, Inc. The trade dress of the RIDGID® 300 Power...

UL AND FM APPROVED 200 PER BOX 20 LBS For fire sprinkler and other commercial piping Knurled swivel nut (3/8")design permits vertical hanger adjustment after installation. Zinc Plated steel construction Rubber...

Riptide Single Action Water Diffuser with built in pitot.With FIVE different unique diffuser models, and as many as FOUR 2.5" streams in a SINGLE diffuser, The Riptide Flow Testing System™️ has unparalleled capabilities.Light weight,...

Model 551 Riser Clamp (Galvanized) Function: Designed for supporting and stabilizing vertical pipe runs. Clamp is designed for standard iron pipe O.D. and must be considered when sizing other types of piping. Material: Low...

Model 550 Riser Clamp Function: Designed for supporting and stabilizing vertical pipe runs. Clamp is designed for standard iron pipe O.D. and must be considered when sizing other types of piping. Material: Low carbon steel ...

White plastic rod button Injection molded plastic 3/8" inner diameter x 1/2" height x 1-51/64" Outer diameter Recommended for giving a finished appearance where threaded rod enters ceiling (100 per case) Click...

4" NPT to two 2.5" NPT in a straight body cast brass standpipe roof manifold. Can function as inlet or outlet.Used as a standpipe roof outlet connection, fire pump test connection or wall hydrant by the fire service professions.The body...

Sammy® CST 2 for Concrete. Made with The Original Tapcon®. 1/2" ROD 5/16" x 1 1-1/2" shank length 1/4" pre-drilled pilot hole required. Install with Sammy #14 (Black) Nut Driver Made in the U.S.A. Click here for Technical Data Minimum Purchase 1...

SXP 3.5 for 1/2" Rod Structural attachment for installation of branch/end of line restraint using 1/2" all thread (.405" OD) or end thread rod (.500" OD). Designed for use in steel purlin ranging from 16 ga. through 1/8" in low...

Sammy Sidewinder® SWDR 1 w/ retaining nut for Steel.Made with Teks® self-drilling fasteners3/8" ROD 1/4-20 x 1 TEKS 3 shank lengthNo pre-drilling required.Minimum Thickness: .036" - 20 ga.Maximum Thickness: 3/16"Install with Sammy #14 SW...

Current Special: Buy 125 pcs: $0.99 each Buy 1000 pcs: $0.87 each Sammy Super Screw SWG-20 horizontal mount Self drilling and tapping into wood 3/8" rod x 2" shank length 1/4" shank diameter UL listed Use...

Sammy® GST 10 for Wood. 3/8" ROD 1/4 x 2" shank length No pre-drilling required. Install with Sammy #14 (Black) Nut Driver Made in the U.S.A. UL Listed. Click here for Technical Data Minimum Purchase 1 Box of 25 pcs ...

Model 031 Seismic Clamping Pipe Attachment Brace to Schedule 40 pipe, and can also brace to structural steel, and 12 gauge strut. Universal swivel design allows for attachment at any angle and the ability to be used in a lateral...

Model 020 Rod Swivel Attachment Used as a branch line restraint for structural attachment. Designed to be used with PHD Model 350 Beam Clamp

Model 010 Sway Brace Pipe Attachment The pipe attachment component of a sway brace system used in conjunction with a structural attachment fitting and joined together with a bracing pipe element forming a complete sway brace...

Seismic Sway Brace Pipe Attachment(Large)1"Brace, 2-1/2"Pipe(PHD 015) Function: Designed for bracing pipe against sway and seismic disturbance. The pipe attachment component of a sway brace system used in conjunction with a PHD...

Sign Alum 5x7 Anti-Freeze System Fire Sprinkler Identification Sign White powder coated 21 gauge (.0285") aluminum Red background with white letters 4 Holes punched in corners Available Personalized

Model 508 Split Ring Hanger - Hinged For suspension of non-insulated stationary pipe lines Electro-Galvanized Malleable Iron Click here for Technical Data

Split Ring Hanger Two Screw Galvanized 1/2" IPS

Spotter Level Has 1" Male NPT & 1/2" Female NPT Screw the level into a threaded pipe fitting and use it to spot the outlet you are tightening either plumb or level. ½" female and 1" male NPT threaded ends for multiple use 7" long threaded...

Spotter Level CPVC Adapter The CPVC adapter simply screws into the 1/2" female threads of the Spotter Level and allows you to use it on 1" CPVC fittings.  

Spotter Level Magnetic Laser Attachment Magnetic laser attachment easily attaches to the magnetic end of the Spotter Level and provides a mark on ceilings, walls or floors to get an accurate location for where the pipe needs to penetrate through. The...

12 head spare headbox for sprinkler heads. Powder coated red heavy gauge steel construction. Knockouts and shelf to accomodate 1/2" ips or 3/4" ips sprinkler heads. (20 per box, 300 per case) Click here for...

Universal sprinkler stopper device, stops water damage caused by an open sprinkler head without shutting down the entire system. Simply push rubber stop into opening of sprinkler head and turn handle until water flow stops. Beveled...

Standard Flexbile Couplings Ductile Iron construction. Non-lead orange paint Conforms to ASTM A536 UL listed, FM Approved Flexible Coupling Data Sheet PDF Grooved Catalog PDF Designed for service up to 300psi/20bar depending on sizes; it forms a...

4" Storz Cap w/ChainLightweight aluminum alloy - hardcoated to reduce corrosion & abrasion. Click here for Technical Data

4" Storz X 4" NPT (F) rocker lug straight rigid. Lightweight aluminum alloy - hardcoated to reduce corrosion and abrasion. Available with screen. Click here for Diagram Click here for Technical Data

Affixed to the face of 2 x 4 members to protect utility pipes and to protect nails from penetrating into hidden live wires (NMC Cable ) which may be running through notches or through the drilled holes in the stud. ...

SuperWeld Anaerobic Weld Sealant Seeks out casting irregularities and penetrates the smallest pores or cracks. Wicking adhesive sealant prevents loosening of metal threaded fasteners. Designed for pre-assembled fasteners and porosity sealing of welds...

System Sensor Riser Manifold GROOVED 2" w/Pressure Relief Made in USA Click here for Technical Data (PDF) California Prop 65 WARNING WARNING: This product can expose you to chemicals and or materials...

Commercial Riser Assembly for Commercial Applications with System Sensor Water Flow Switch (Made in USA)+Test & Drain Valve (UL/FM)+Pressure Relief Trim+Bronze Grooved Butterfly Valve (UL/FM)+Ductile Iron Grooved Check Valve (UL/FM)+4...

Commercial Riser Assembly for Commercial Applications with System Sensor Water Flow Switch (Made in USA+Test & Drain Valve (UL/FM)+Bronze Grooved Butterfly Valve (UL/FM)+Ductile Iron Grooved Check Valve (UL/FM)+4 Standard Rigid Couplings...

Commercial Riser Riser Manifold for Commercial ApplicationsBasic Trim with Test & Drain ValveMade in USAClick here for Technical Data (PDF) California Prop 65 WARNING WARNING: This product can expose you to...

The System Sensor OSY2 is used to monitor the open position of an Outside Screw and Yoke (OS&Y) type gate valve. Features NEMA 3R-rated enclosure User-friendly mounting bracket fits newer valve yokes Single side conduit entry does not...

Argco Test and Drain Valve Female NPT Inlet and Outlet Forged Brass Body Large, integral sight glass on each side Brass Finish Ball with Teflon Seats 1/2" (nominal) test orifice5.6 K FactorUL ULC Listed, FM Approved Click...

Provides the test and express drain functions for wet fire sprinkler systems on multi-story installations requiring pressure relief (NFPA 13 and NFPA 13R). Features a Pressure Relief Valve with drain pipe. Complies with NFPA 13...

For plumbers and pipe fitters. Color coded pink to signify that it is heavier than standard white thread seal tapes. Ensures leak free joints. Exceeds MIL Spec T-27730A. Temperature range of -450F to +550F. Teflon®...