Argco

3" x CLOSE Black Steel Nipple Connection Threaded At One End Black Steel, Schedule 40 WOG 150 PSI 150 At 150° F Saturated Steam Pressure 300. California Prop 65 WARNING WARNING: This product can expose you to chemicals and or materials that are...

3/4" x CLOSE Black Steel Nipple Connection Threaded At One End Black Steel, Schedule 40 WOG 150 PSI 150 At 150° F Saturated Steam Pressure 300. California Prop 65 WARNING WARNING: This product can expose you to chemicals and or materials that are...

4" x CLOSE Black Steel Nipple Connection Threaded At One End Black Steel, Schedule 40 WOG 150 PSI 150 At 150° F Saturated Steam Pressure 300. California Prop 65 WARNING WARNING: This product can expose you to chemicals and or materials that are...

Indoor & Outdoor use Marks on Metal Patented valve-operated Paint-fed fiber tip Works on most surfaces Permanent Quick drying Water proof Highly visible Resists abrasions Fade resistant paint Oil based opaque paint Conforms to ASTM 4236 2.3 mm bullet...

The OSYSU is used to monitor the open position of an OS&Y (outside screw and yoke) type gate valve UL, ULC and CSFM Listed, FM Approved, NYMEA Accepted, CE Marked Enclosure: Cover - Die-Cast Finish - Red Spatter Enamel ...

The OSYSU is used to monitor the open position of an OS&Y (outside screw and yoke) type gate valve UL, ULC and CSFM Listed, FM Approved, NYMEA Accepted, CE Marked Enclosure: Cover - Die-Cast Finish - Red Spatter...

Pressure switch with twp sets of SPDT contacts The Potter PS10 Series Pressure Actuated Switches are designed for the detection of a waterflow condition in automatic fire sprinkler systems of particular designs such as wet...

VSRS Vane Type Waterflow Alarm Switch with Retard (for small pipe) Usage: Listed plastic, copper and schedule 40 iron pipe. Fits pipe sizes - 1", 1 1/4", 1 1/2") and 2" UL, CUL and CSFM Listed, FM Approved, LPCB...

Pressure Relief Kit includes: Argco Pressure Relief Valve Pre-set 175 PSI 1/2"" x 1/2"" 12"" x 3/8"" tube with hose clamps Two Brass Fittings 3/8 X 1/2 Hose Barb X Male Pipe Elbow Two Pipe Nipples Steel 1"" x CLOSE Black Malleable GALVANIZED Reducing Tee...

Adjustable Pressure Relief Valve 1/2" x 1/2" (100/51#) Adjustable 50-200 PSI Cast brass body (100 per case) Click here for Technical Data California Prop 65 WARNING WARNING: This...

Propylene Glycol 38% Pre-Mix Anti Freeze Pre-Mix Antifreeze for Wet Fire Sprinkler Systems Factory pre-mixed, non -toxic antifreeze designed specifically for use in wet fire sprinkler systems. Propylene glycol-based material which is suitable in all...

PT® Drop Head Set 1/2" NPT Complete with dies Comparable to 12R style dies Fits hand ratchet threader and RIDGID® 700 power hand threader. Cross Reference: 37390 Click here for Technical...

Replacement Heel Jaw Assembly for 12" to 14" Pipe WrenchCross Reference: 31635All parts interchangeable with RIDGID® Click Here for Replacement Parts Breakdown RIDGID® is a registered trademark of RIDGID, Inc. ARGCO is not an...

Purlin Clamp (Malleable Iron-Plain)(Cross Reference PHD Model 290)3/8"" rod sizeAlso available zinc platedStructural attachment to lower flange of metal beams or purlins with 45° flanges up to 2"" long and 90° flanges up to 1-1/2"" highSet screw...

Refractometer Digital Palm Abbe F/ Glycerine/Glycol (PA203 x) Laboratory Precision in the Palm of Your Hand! The Palm Abbe refractometer is fast, convenient, and easy to use. Simply place a drop or two of fluid in the titanium well and press a button...

Universal High Speed Steel Threading Dies Cross Reference: 47765 Money back guarantee on all of ARGCO's pipe threading tools. NPT Right hand threads that fit a RIDGID® ® pipe threader. ...

PT 44815 Brush Set fits RIDGID® 700 Hand Held Power Drive Cross Reference 44815 Brush Assembly (2) Click here for Parts Breakdown (PDF)RIDGID® is a registered trademark of RIDGID, Inc. ARGCO is not an authorized...

Keep threading oil & chips in the oiler and off the walls and floor. Easily attaches to RIDGID® 300 Threader RIDGID® is a registered trademark of RIDGID®, Inc. The trade dress of the RIDGID® 300 Power...

UL AND FM APPROVED 200 PER BOX 20 LBS For fire sprinkler and other commercial piping Knurled swivel nut (3/8")design permits vertical hanger adjustment after installation. Zinc Plated steel construction Rubber...

Riptide Single Action Water Diffuser with built in pitot.With FIVE different unique diffuser models, and as many as FOUR 2.5" streams in a SINGLE diffuser, The Riptide Flow Testing System™️ has unparalleled capabilities.Light weight,...

Model 551 Riser Clamp (Galvanized) Function: Designed for supporting and stabilizing vertical pipe runs. Clamp is designed for standard iron pipe O.D. and must be considered when sizing other types of piping. Material: Low...

Model 550 Riser Clamp Function: Designed for supporting and stabilizing vertical pipe runs. Clamp is designed for standard iron pipe O.D. and must be considered when sizing other types of piping. Material: Low carbon steel ...

White plastic rod button Injection molded plastic 3/8" inner diameter x 1/2" height x 1-51/64" Outer diameter Recommended for giving a finished appearance where threaded rod enters ceiling (100 per case) Click...

4" NPT to two 2.5" NPT in a straight body cast brass standpipe roof manifold. Can function as inlet or outlet.Used as a standpipe roof outlet connection, fire pump test connection or wall hydrant by the fire service professions.The body...

Sammy® CST 2 for Concrete. Made with The Original Tapcon®. 1/2" ROD 5/16" x 1 1-1/2" shank length 1/4" pre-drilled pilot hole required. Install with Sammy #14 (Black) Nut Driver Made in the U.S.A. Click here for Technical Data Minimum Purchase 1...

SXP 3.5 for 1/2" Rod Structural attachment for installation of branch/end of line restraint using 1/2" all thread (.405" OD) or end thread rod (.500" OD). Designed for use in steel purlin ranging from 16 ga. through 1/8" in low...

Sammy Sidewinder® SWDR 1 w/ retaining nut for Steel.Made with Teks® self-drilling fasteners3/8" ROD 1/4-20 x 1 TEKS 3 shank lengthNo pre-drilling required.Minimum Thickness: .036" - 20 ga.Maximum Thickness: 3/16"Install with Sammy #14 SW...

Current Special: Buy 125 pcs: $0.99 each Buy 1000 pcs: $0.87 each Sammy Super Screw SWG-20 horizontal mount Self drilling and tapping into wood 3/8" rod x 2" shank length 1/4" shank diameter UL listed Use...

Sammy® GST 10 for Wood. 3/8" ROD 1/4 x 2" shank length No pre-drilling required. Install with Sammy #14 (Black) Nut Driver Made in the U.S.A. UL Listed. Click here for Technical Data Minimum Purchase 1 Box of 25 pcs ...

Model 031 Seismic Clamping Pipe Attachment Brace to Schedule 40 pipe, and can also brace to structural steel, and 12 gauge strut. Universal swivel design allows for attachment at any angle and the ability to be used in a lateral...

Model 020 Rod Swivel Attachment Used as a branch line restraint for structural attachment. Designed to be used with PHD Model 350 Beam Clamp

Model 010 Sway Brace Pipe Attachment The pipe attachment component of a sway brace system used in conjunction with a structural attachment fitting and joined together with a bracing pipe element forming a complete sway brace...

Seismic Sway Brace Pipe Attachment(Large)1"Brace, 2-1/2"Pipe(PHD 015) Function: Designed for bracing pipe against sway and seismic disturbance. The pipe attachment component of a sway brace system used in conjunction with a PHD...

Sign Alum 5x7 Anti-Freeze System Fire Sprinkler Identification Sign White powder coated 21 gauge (.0285") aluminum Red background with white letters 4 Holes punched in corners Available Personalized

Model 508 Split Ring Hanger - Hinged For suspension of non-insulated stationary pipe lines Electro-Galvanized Malleable Iron Click here for Technical Data

Split Ring Hanger Two Screw Galvanized 1/2" IPS

Spotter Level Has 1" Male NPT & 1/2" Female NPT Screw the level into a threaded pipe fitting and use it to spot the outlet you are tightening either plumb or level. ½" female and 1" male NPT threaded ends for multiple use 7" long threaded...

Spotter Level CPVC Adapter The CPVC adapter simply screws into the 1/2" female threads of the Spotter Level and allows you to use it on 1" CPVC fittings.  

Spotter Level Magnetic Laser Attachment Magnetic laser attachment easily attaches to the magnetic end of the Spotter Level and provides a mark on ceilings, walls or floors to get an accurate location for where the pipe needs to penetrate through. The...