Wal-Rich Corporation

3/4″ FIP Chrome-Plated Quarter Turn Sillcock  

3/4″ FIP Chrome-Plated Quarter Turn Sillcock (Lead-Free)      

3/4″ FIP X 3/4″ Female Quick-Connect Fitting Design Features: Quick Disconnect Print / View Specs PDF Operating Specifications:Temperature: -40° to 250° FOperating Pressure: 1/2 psiMax. Flow Capacity: 60,000 BTU@ .3 W.C. pressure...

3/4″ FIP X 3/4″ Male Quick-Connect Fitting Design Features: Quick Disconnect Print / View Specs PDF Operating Specifications:Temperature: -40° to 250° FOperating Pressure: 1/2 psiMax. Flow Capacity: 60,000 BTU@ .3 W.C. pressure drop...

3/4″ Flare X Flare Adapter (Lead-Free)      

3/4″ Flare X MIP Adapter (Lead-Free)      

3/4″ Flat Shower Roller With Screw Design Features: Sold in Pairs, Includes:Roller (2)1/8” x 3/8” Phillips Head Screw (2) Domestic Print / View Specs PDF

3/4″ Galvanized 2 Hole Pipe Straps Design Features: Stamped Carbon Steel Construction Galvanized Finish Domestic Print / View Specs PDF

3/4″ Galvanized Insulated Union for Gas Meters

3/4″ Galvanized Split-Ring Hanger (Hinge-Type) Design Features: Malleable Iron Construction Avalible in Black, Galvanizedand Copper Finish Imported Print / View Specs PDF Use: Hinge design makes installationeasier and saves time.

3/4″ Gas Regulator Vent Square Vent Design Features: Non-Corrosive Aluminum Construction 16” x 16”, .0018 Gauge ScreenScreen Designed to Blow-Out in Reliefif the Screen becomes Blocked Circular Vent Design Features: Galvanized...

3/4″ Hex Slotted “TEK” Screws Design Features: Hard Zinc Plated 1/4” Slotted Hex Head 18 TPI Imported Prit / View Specs PDF   Opperating Specifications:Thread Strength: 1575 lbs.*TorsionalStrength: 42 lbs.*

3/4″ Hinged Steel Pipe Clamp Design Features: 1/16” Steel Construction Zinc Dichromate Finish 1/8” Rubber Gasket Includes 2 Bolts with Nuts Imported Print / View Specs PDF

3/4″ Hot Water Relief Valve – Long Shank      

3/4″ Hot Water Relief Valve 45 PSI      

3/4″ ID X 1OD” 50′ Vinyl Tubing – FDA Approved      

3/4″ Internal Pipe Wrench      

3/4″ IP White Plastic Floor & Ceiling Plate      

3/4″ IPS Anodeless Riser – Poly Plain-end SDR-11 Poly-End Anodeless Gas Meter Risers Anodeless Design For Underground PE Pipe (ASTM D 2513) Only Corrosion Resident Fusion Bonded Epoxy Coating Yellow Medium Density Polyethylene - PE2406 Made...

3/4″ IPS Anodeless Riser – With Con-Stab SDR-11 Con-Stab® Anodeless Gas Meter Risers Anodeless Design For Underground PE Pipe (ASTM D 2513) Only Continental’s Patented “ID Seal” Yellow Medium Density Polyethylene -...

  Print / View Specs PDF      

3/4″ IPS Compression Gas Service Riser Design Features: Steel Construction Fusion Epoxy Coated Nut Bottoms Out When Fully Secure:No Need for Special Training or Torque Tools Domestic Print / View Specs PDF Operating Specifications:Pressure: 10...

3/4″ IPS Con-Stab Coupling SDR-11 Design Features: Continental’s Patented “ID Seal” For Underground PE Pipe (ASTM D 2513) Only Made in the USA Print / View Specs PDF Operating Specifications:Temperature: -20° to 140°...

3/4″ IPS Con-Stab Elbow SDR-11 Design Features: Continental’s Patented “ID Seal” For Underground PE Pipe (ASTM D 2513) Only Made in the USA Print / View Specs PDF Operating Specifications:Temperature: -20° to 140°...

3/4″ IPS Con-Stab Tee SDR-11 Design Features: Continental’s Patented “ID Seal” For Underground PE Pipe (ASTM D 2513) Only Made in the USA Print / View Specs PDF Operating Specifications:Temperature: -20° to 140°...

3/4″ IPS Con-Stab X 5/8″OD Copper Flare Adapter Design Features:. Continental’s Patented “ID Seal” .For Underground PE Pipe (ASTM D 2513) Only Made in the USA Print / View Specs PDF Operating Specifications:Temperature:...

3/4″ IPS Conbraco “Apollo” Ball Valve

3/4″ IPS Floor & Ceiling Plate Less Spring Design Features: Steel Construction Chrome Finish Imported Print / View Specs PDF

3/4″ IPS Floor & Ceiling Plate With Spring Design Features: Steel Construction Chrome Finish Includes Tension Spring Split for Ease of Installation Imported Print / View Specs PDF

3/4″ IPS Plastic Floor & Ceiling Plate Design Features: Plastic Construction Chrome Finish Split for Ease of Installation Imported Print / View Specs PDF

3/4″ IPS Strut Clamp Design Features: Steel Construction Galvanized Finish Domestic Print / View Specs PDF

3/4″ IPS X 1/2″ IPS Con-Stab Reducing Coupling      

3/4″ IPS X 150′ SDR-11 Yellow Polyethylene Gas Pipe Print / View Specs PDF      

3/4″ IPS X 50′ SDR-11 Yellow Polyethylene Gas Pipe Print / View Specs PDF      

3/4″ Light Duty Copper-Plated Clevis Hanger Design Features: Steel Construction Copper Plated Domestic Print / View Specs PDF

3/4″ Light Duty Steel Clevis Hanger      

1″ Side Outlet Pop Safety Valve      

3/4″ Lockwing Gas Cock

3/4″ Long Brass Compression Coupling (Lead-Free) Design Features: Lead Free* Brass Construction Imported Print / View Specs PDF Operating Specifications:Temperature: 180° FPressure: 125 psi

3/4″ Long Galvanized Compression Coupling Design Features: Malleable Iron Construction Galvanized Finish Imported Print / View Specs PDF Operating Specifications:Temperature: 120° FPressure: 125 PSI