Wal-Rich Corporation

1/2″ Galvanized Split-Ring Hanger (Hinge-Type) Design Features: Malleable Iron Construction Avalible in Black, Galvanizedand Copper Finish Imported Print / View Specs PDF Use: Hinge design makes installationeasier and saves time.

1/2″ Galvanized Top Beam Clamp Design Features: Malleable Iron Construction Avalible in Black or Galvanized Finish Imported Print / View Specs PDF    

1/2″ Galvanized Wide Jaw Top Beam Clamp Design Features: Malleable Iron Construction Avalible in Blackor Galvanized Finish Imported Print / View Specs PDF

1/2″ Hex Nut For Thread Rod Design Features: Steel Constuction Zinc Plated Imported Print / View Specs PDF

1/2″ Hex Slotted “TEK” Screws Design Features: Hard Zinc Plated 1/4” Slotted Hex Head 18 TPI Imported Prit / View Specs PDF   Opperating Specifications:Thread Strength: 1575 lbs.*TorsionalStrength: 42 lbs.*

1/2″ I.D. X 5/8″ O.D. X 100′ Clear Vinyl Tubing Design Features: Resistant to Acids, Alkalis, Solvents, and Fuels Clear Enough to View Fluid Levels and Flow Odorless, Tasteless, Light Weight Resistant to Stress Cracks Easy to Handle...

1/2″ ID X 3/4″ OD 100′ Vinyl Tubing – FDA Approved      

1/2″ ID X 5/8″ OD 100′ Vinyl Tubing – FDA Approved  

1/2″ Internal Pipe Wrench      

1/2″ IP White Plastic Floor & Ceiling Plate      

1/2″ IPS Anodeless Riser with Con-Stab SDR-9

  Print / View Specs PDF      

1/2″ IPS Con-Stab Coupling SDR-9      

1/2″ IPS Con-Stab Elbow SDR-9      

1/2″ IPS Con-Stab Male Adapter SDR-9      

1/2″ IPS Con-Stab Tee SDR-9      

1/2″ IPS Floor & Ceiling Plate Less Spring Design Features: Steel Construction Chrome Finish Imported Print / View Specs PDF

1/2″ IPS Floor & Ceiling Plate With Spring Design Features: Steel Construction Chrome Finish Includes Tension Spring Split for Ease of Installation Imported Print / View Specs PDF

1/2″ IPS Plastic Floor & Ceiling Plate Design Features: Plastic Construction Chrome Finish Split for Ease of Installation Imported Print / View Specs PDF    

1/2″ IPS Snap Well For Thermometer      

1/2″ IPS Strut Clamp Design Features: Steel Construction Galvanized Finish Domestic Print / View Specs PDF

1/2″ Light Duty Copper-Plated Clevis Hanger Design Features: Steel Construction Copper Plated Domestic Print / View Specs PDF

1/2″ Light Duty Steel Clevis Hanger Design Features: Steel Construction Domestic Print / View Specs PDF        

1/2″ Long Brass Compression Coupling (Lead-Free) Design Features: Lead Free* Brass Construction Imported Print / View Specs PDF Operating Specifications:Temperature: 180° FPressure: 125 psi

1/2″ Long Galvanized Compression Coupling Design Features: Malleable Iron Construction Galvanized Finish Imported Print / View Specs PDF Operating Specifications:Temperature: 120° FPressure: 125 PSI

1/2″ M X F Expansion Tank Isolation Valve      

1/2″ Male Chrome Plated Flex Adapter (Lead-Free) Design Features: Lead Free* Brass Construction Imported Print / View Specs PDF

1/2″ Male Rough Brass Plain End Bibb – (Lead-Free) Design Features: Lead Free* Brass Available in Rough Brass orChrome Finish Imported Print / View Specs PDF

1/2″ Malleable Iron Railing Flange – Black Design Features: Malleable Iron Construction Available in Galvanizedor Black Finish Imported Print / View Specs PDF

1/2″ Mepco # Angle Steam Trap      

1/2″ Mepco Angle Steam Trap Design Features: Cast Brass Body and Cover Non-Corrosive Working Parts Stainless Steel Thermostatic Disks Simple Rugged Construction Sensitive Thermostatic Action Minimum Wear on Working Parts Thoroughly Tested Free...

1/2″ MIP Hammer Arrester (Lead-Free) Design Features: Lead Free* Brass Construction Imported Print / View Specs PDF Operating Specifications:Pressure: 200 psi Use: Designed to protect water linesduring pressure surges caused by quickvalve closure...

1/2″ OD X 100′ White Polyethylene Tubing

1/2″ PEX Chrome-Plated Quarter Turn Sillcock (Lead-Free)      

1/2″ PEX Drop Ear Ball Valve (Lead-Free)      

1/2″ PEX Drop Ear Ball Valve With Drain (Lead-Free)      

1/2″ Pipe Tap      

1/2″ Pressure Relief Valve      

1/2″ PVC “All-Around” Nailer Design Features: Isolates Supply Tubing from Wood Framing Preload with Nail Print / View Specs PDF Operating Specifications:Max Temperature: 160° F ContinuousImpact Resistant to 0° F Use:...

1/2″ PVC 2-Hole Clamp Operating Specifications:Max Temperature: 160° F ContinuousImpact Resistant to 0° F Use: Supports copper, PEX, polybuthyleneand ideally isolates CPVC tubing from wood.Reduces noise from tubing expansion and contraction...