Milwaukee

Milwaukee 2637-20 Description The introduction of the new M18™ Cordless Shears has made Milwaukee® the largest, most innovative cordless shear selection on the market. The redesigned body provides an...

INCLUDES: • (1) M12 FUEL 16 Gauge nibbler• (1) Chip collection bagFEATURES:• Fast, Clean Cuts in 16GA Mild Steel Up to 7 Feet per Minute• Power to Cut 22GA Spiral Duct Seams• Lighter Weight• Power...

Milwaukee 2635-20 Description The introduction of the new M18™ Cordless Shears has made Milwaukee® the largest, most innovative cordless shear selection on the market. The redesigned body provides an...

FEATURES: • 4.0 amp, 1,000 SPM • Cuts up to 8.75 ft. per minute • 1.65 in. starting hole required • AC-DC toggle switch allows for two-handed operation A nibbler uses a punch and die to make the...

Milwaukee 2636-20 Description The introduction of the new M18™ Cordless Shears has made Milwaukee® the largest, most innovative cordless shear selection on the market. The redesigned body provides an...

Milwaukee 6852-20 Includes  Hex WrenchMilwaukee 6852-20 Features  360° swivel head  6.8 amp Milwaukee motor, trigger speed control: 0-2,500 rpm spindle speed  Ergonomic tactile...

Milwaukee 48-44-0151 Description Milwaukee's 18 ga. Shear model 6850 features a swivel head that contains a center blade (48-44-0150), a left blade (48-44-0160) and a right blade (48-44-0170). Each...

Milwaukee 48-44-0122 Description This 16 gauge shear blade set includes both top and bottom blade to renew the cutting sharpness of your Milwaukee model 6805 metal cutting shear. Use feeler gauge...

INCLUDES: • (1) M12 FUEL™ 16 ga Nibbler Die Holder ExtensionFEATURES:• Compatible with M12™ FUEL 16 ga Nibbler• Deeper cuts• Good for cutting corrugated metal• Quick to assembleSPECIFICATIONS:•...

FEATURES: • Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee tool Due to prolonged, heavy use some components may need to be replaced. Use...

Milwaukee 49-22-8440 Description Dual alternating tooth geometry allows MILWAUKEE’s Tungsten Carbide Tipped Annular Cutters to displace material quicker and give the user fast, burr-free holes in...

Milwaukee 49-22-8430 Description Dual alternating tooth geometry allows MILWAUKEE’s Tungsten Carbide Tipped Annular Cutters to displace material quicker and give the user fast, burr-free holes in...

Milwaukee 2623-20 Includes(1) M18™ 3-1/4" Planer (Bare Tool) (2623-20)(1) Bevel/Edge Guide(2) Double Edge Carbide BladeMilwaukee 2623-20 FeaturesPowerful Motor: Delivers up to 14,000 RPMsDepth...

Milwaukee 2660-22CT Description The M18 FUEL™ ¼” Blind Rivet Tool w/ ONE-KEY™ is the fastest cordless riveting tool in the market. This tool offers 3X longer tool and jaw life, decreasing high energy...

DeWalt D24000 IncludesBladeDeWalt D24000 FeaturesCantilevering Rail/Cart system allows for 24" ripping capacity - 18" tile on diagonalOnly 69 lbs - allows one person to transport and set up...

INCLUDES: • (1) M18 FUEL 5 CFM Vacuum Pump• (1) M18 & M12 Rapid Charger• (1) M18 REDLITHIUM HIGH OUTPUT XC8.0 BatteryFEATURES:• 1/2”, 3/8” & 1/4” Ports• Up to 20% Higher Air Flow vs Corded•...

Milwaukee 48-38-2012 Description The MILWAUKEE® 12 ft Screed Bar has an extra-rigid, double triangle design to transmit consistent vibrations across the length of the bar, with minimal variability...

INCLUDES: • (1) Digital Angle Gauge• (1) Soft Carrying Case• (2) AAA BatteryFEATURES:• Quick Angle Finding• Easy Digital Navigation• Quick Readings, Real Time Measurements• Amplified Rare-Earth...

INCLUDES: • (1) Blind Rivet Outer Jaw Housing• (1) Blind Rivet Inner Jaw Housing• (1) Blind Rivet Jaws• (1) Blind Rivet Pusher Tube• (1) Blind Rivet Pusher Tube Spring• (1) M18 FUEL™ 1/4" Blind...

INCLUDES: • (1) 1/2 in. Quick Change Tang Drive Steel Hawg® Cutter FEATURES: • 1/2 in. bit diameter • Quick change tang drive • 1 in. cutting depth • For use on 4245 Steel Hawg® SPECIFICATIONS:...

Milwaukee 49-59-3069 Description Milwaukee Tungsten Carbide Tipped Annular Cutters offer an Advanced Tooth Geometry that Cuts, Cleans, and Clears while drilling, leading to Faster Holes and Longer...

Milwaukee 49-57-0030 DescriptionSteel Hawg® Arbor with 3/4 inch shank for use in Milwaukee Magnetic Drill Motor 4262-1. This Arbor adapts Threaded Steel Hawg® Cutters to a 3/4 inch chucked Motor. For...

Milwaukee 49-59-2125 Features  Unique tooth geometry allows for better centering and faster cutting  Thin wall design enables cutters to cut faster and more efficiently by removing less...

INCLUDES: • (1) Hucktainer® Fastener AdapterFEATURES:• Compatible with the 2661 M18 FUEL™ 1/4" Lockbolt Tool w/ ONE-KEY™ • Allows Installation of HUCK(tm) 3/8" Hucktainer Fasteners • Compatible with...

INCLUDES: • M18 FUEL™ 1/4" Blind Rivet Tool w/ ONE-KEY™ Bare Tool (2660-20), M18 FUEL™ 1/4" Blind Rivet Tool w/ ONE-KEY™ Retention Nose Piece 4-Pack (49-16-2660RP), Nose Piece Wrench, Mandrel...

Milwaukee 3300R Description The MILWAUKEE ROLL-ON 7200W/3600W 2.5kWh Power Supply provides the best power for the toughest jobs, instant set-up to eliminate gas and temporary power hassles, and...

Milwaukee 49-59-1250 DescriptionUtilizing a duel alternating tooth geometry and a thin wall construction Milwaukee's Annular cutters cut up to 15% faster than the competition. The propriatary steel...

Milwaukee 49-59-4056 Description Milwaukee Tungsten Carbide Tipped Annular Cutters offer an Advanced Tooth Geometry that Cuts, Cleans, and Clears while drilling, leading to Faster Holes and Longer...

Milwaukee 49-57-0038 DescriptionReplacement Pilot Bit for use with Arbor 49-57-0035 which can be used for both steel plate and sheet metal carbide tipped Hole Saws. This bit is standard equipment...

Milwaukee 49-59-0500 Specs: •  1/2" x 1" HSS Annular Cutter •  Hole Size 1" Depth Milwaukee 49-59-0500 Features : •  3/4" diameter shank-industry standard •  Unique tooth...

Milwaukee 49-57-0010 DescriptionSteel Hawg® Arbor with No. 3 Morse Taper shank for use in Milwaukee Magnetic Drill Motors 4292-1 or 4297-1. This Arbor adapts Threaded Steel Hawg® Cutters to a No. 3...

Milwaukee 49-59-2138 Features  Unique Tooth Geometry - Allows for beter centering and faster cutting.  Thin Wall Design - Enables cutters to cut faster and more efficiently by removing less...

Milwaukee 49-59-2100 Features  3/4" Diameter shank - Industry standard  Unique tooth geometry - Allows for better centering and faster cutting  Thin wall design - Enables cutters to...

Milwaukee 48-38-2004 Description The MILWAUKEE® 4 ft Screed Bar has an extra-rigid, double triangle design to transmit consistent vibrations across the length of the bar, with minimal variability...

Milwaukee 48-55-0175 DescriptionMilwaukee?s Meter Case can hold many Milwaukee Meters. Constructed of rugged nylon with a three sided zipper closure, the case is opened to reveal one inside pocket...

DETAILS: INCLUDES: • One Meter Case FEATURES: • Case constructed of rugged nylon • Three sided zipper closure • One inside pocket and one main compartment make it easy to find your accessories •...

DETAILS: INCLUDES: • (1) black Industrial Alligator Clip • (1) red Industrial Alligator Clip FEATURES: • Universal Alligator Clips attach to all Connecting Test Leads • UL approved for improved...

DETAILS: INCLUDES: • (1) Black test lead • (1) Red test lead FEATURES: • Universal Connecting Test Leads plug into all digital multimeters, clamp meters, and fork meters • UL approved for improved...

DETAILS: INCLUDES: • One Zippered Accessory Case FEATURES: • Case constructed of rugged nylon • Three sided zipper closure • One inside pocket and one main compartment make it easy to find your Meter...

Milwaukee 23-66-4205 Includes(1) Switch