Mfg. Catalogs

1/2" MPT x 30" Threaded Brass Nipple- Chrome Plated 1/2″ MALE PIPE THREADS, 30″ LENGTH, CHROME PLATED.  

1/2" MPT X 36" Threaded Brass Nipple- Chrome Plated 1/2″ MALE PIPE THREADS, 36″ LENGTH, CHROME PLATED.  

1/2" MPT x 4" Threaded Red Brass Nipple. Lead Free. 1/2″ MALE PIPE THREADS, 4″ LENGTH, RED BRASS.  

1/2" MPT x 4-1/2" Threaded Brass Nipple- Chrome Plated- Lead Free 1/2″ MALE PIPE THREADS, 4-1/2″ LENGTH, CHROME PLATED BRASS.  

1/2" MPT x 5" Threaded Brass Nipple- Chrome Plated- Lead Free 1/2″ MALE PIPE THREADS, 5″ LENGTH, CHROME PLATED BRASS.  

1/2" MPT x 5" Threaded Red Brass Nipple. Lead Free. 1/2″ MALE PIPE THREADS, 5″ LENGTH, RED BRASS.  

1/2" MPT x 8" Threaded Brass Nipple- Chrome Plated 1/2″ MALE PIPE THREADS, 8″ LENGTH, CHROME PLATED.  

1/2" MPT/1/2" CTS x 3/4"MHT Boiler Drain 1/2″ male pipe thread X 1/2″ copper tube size. 3/4″ hose thread outlet. Forged brass body. Heavy cast iron handle. Not for use with potable water systems. Max working pressure: 150psi Working...

1/2" Nipple Extractor / Internal Pipe Wrench Fits 1″ pipe. Zinc plated.  

1/2" npt Pipe Tap, High Carbon Steel

1/2" npt Straight Water Heater Thermometer w/ Brass Well (40-260 Degrees F) 2″ X 1/2″ NPT brass well. Range: 40-260 degrees Fehrenheit (5-120 x 2 C). For use with commercial and residential boilers, refrigeration systems, small pipe and...

1/2" OD Brass Compression Nut- Chrome Plated 1/2″ OUTSIDE DIAMETER. TEMPERATURE RANGES FROM -65 TO 250 DEGREES FAHRENHEIT. USED WITH COPPER, BRASS & ALUMINUM TUBING, LOW AND MEDIUM AIR, WATER AND OIL PRESSURE LINES.  

1/2" OD Compression Sleeve Puller Fits 5/8″ OD compression nuts. Armless design that screws directly into compression nut for quick removal. Removes sleeve without damaging walls.  

1/2" OD x 10" Bending Spring 1/2″ OD, 3/8″ ID, 10″ LENGTH. USED FOR BENDING COPPER WATER TUBING OR ANY SOFT TUBING WITHOUT KINKS.  

1/2″ OD X 100′ White Polyethylene Tubing

1/2" Pex (F1807) x 3/8" OD Qtr Turn Angle Stop - Lead Free Meets these codes:Uniform Plumbing Code, National Plumbing Code of Canada. Meets these standards: ASME A112.18.1-2012/CSA B125.1-12. cUPC listed. Lead free. NSF61-9.  

1/2″ PEX Chrome-Plated Quarter Turn Sillcock (Lead-Free)      

1/2″ PEX Drop Ear Ball Valve (Lead-Free)      

1/2″ PEX Drop Ear Ball Valve With Drain (Lead-Free)      

1/2" Pex X 1/2" Pex Full Port Ball Valve- Lead Free 400 PSI Water, Oil, Gas. 150 PSI working steam pressure. Hard chrome plated brass ball. Quarter turn operation. Dacromet plated steel handles with vinyl grip and vibration proof nut. Ideal for...

1/2" Pex x 3/8" OD Multi-Turn Straight Stop- Lead Free Meets these codes: Uniform Plumbing Code, National Plumbing Code of Canada. Meets these standards: ASME A112.18.1-2012/CSA B125.1-12. cUPC listed. Lead free. NSF61-9.  

1/2″ Pipe Tap      

1/2" Plastic Fitting Saver Tool Repairs sockets/hubs of PVC, ABS, DWV pipe, fittings, and PVC ball valves below slab or sub floor.  

1/2" Plastic Nipple Caddy Tray 11″ X 7-1/2″ DIMENSIONS. HOLDS 77 NIPPLES. MADE OF HIGH IMPACT PLASTIC. WILL NOT RUST OR CORRODE. STRONG ENOUGH TO TAKE THE ABUSE YET ONE-HALF THE WEIGHT OF METAL.  

1/2" Power Wood Boring Bit

1/2″ Pressure Relief Valve      

1/2″ PVC “All-Around” Nailer Design Features: Isolates Supply Tubing from Wood Framing Preload with Nail Print / View Specs PDF Operating Specifications:Max Temperature: 160° F ContinuousImpact Resistant to 0° F Use:...

1/2″ PVC 2-Hole Clamp Operating Specifications:Max Temperature: 160° F ContinuousImpact Resistant to 0° F Use: Supports copper, PEX, polybuthyleneand ideally isolates CPVC tubing from wood.Reduces noise from tubing expansion and contraction...

1/2″ PVC Handle Copper Fitting Brush Design Features: Single Spiral 2 Ply Wire Construction Plastic Handle with Hole for Hanging Imported Print / View Specs PDF

  Print / View Specs PDF      

1/2″ PVC Suspension Clamp Operating Specifications:Max Temperature: 160° F ContinuousImpact Resistant to 0° F Use: Supports copper, PEX,polybuthylene and ideally isolatesCPVC tubing from wood. Reducesnoise from tubing expansionand...

1/2″ PVC Tube Nailer Design Features: Preload with Nail Print / View Specs PDF Operating Specifications:Max Temperature: 160° F ContinuousImpact Resistant to 0° F Use: Supports copper, PEX, andpolybutylene tubing. Not recommendedfor CPVC...

1/2″ Recessed Fire Head Guard      

1/2″ Sheet Metal “ZIP” Screws Design Features: Hard Zinc Plated 1/4” Slotted Hex Head Imported Print / View Specs PDF

1/2″ Short Brass Compression Coupling (Lead-Free) Design Features: Lead Free* Brass Construction Imported Print / View Specs PDF Operating Specifications:Temperature: 180° FPressure: 125 psi

1/2″ Short Galvanized Compression Coupling        

1/2" Sink Bibb w/ Flange- Chrome Plated 1/2″ FIP INLET CONNECTION, 3/4″ THREADED HOSE OUTLET CONNECTION  

1/2″ Skinner Emergency Pipe Clamp      

1/2″ Stackable Closet Flange Spacer Design Features: PVC Construction Imported Print / View Specs PDF

1/2″ Steel Nipple Tray