Mfg. Catalogs

4" Force Cup Plunger RED RUBBER / 9″ HANDLE  

4″ Galvanized 2 Hole Pipe Straps Design Features: Stamped Carbon Steel Construction Galvanized Finish Domestic Print / View Specs PDF

4″ Galvanized Floodstopper Design Features: Galvanized Steel Construction Individually Boxed Imported Print / View Specs PDF      

4" Galvanized Mechanical Test Plugs Galvanized Steel Flanges with Molded Rubber Gaskets. Fits both cast iron and PVC pipe. Fits minimum pipe ID 3.78″ and maximum pipe ID 4.5″. Maximum back pressure water head is 5 feet Maximum back pressure...

4" Galvanized Swivel Ring for Iron Pipe FITS 4″ iron pipe. 5/8″ rod size. Maximum load: 1000 lbs. UL Listed. FM approved. Meets federal specifications: WW-H-171 (Type), MSS-SP-69 (Type 10).  

4″ Garlock 3000 Blue Ring Gasket      

4″ Garlock 3000 Ring Gasket Strainer      

4″ Gray Schedule 80 PVC Termination Screen        

4" Heavy Plastic Test Plug with Metal Bolt and Wing Nut WITH METAL BOLT AND WING NUT. HEAVY PLASTIC FLANGES WITH MOLDED RUBBER GASKETS. FITS BOTH CAST IRON AND PVC PIPE.  

4" Hub PVC Floor Sink Base Only (less strainer/grate)

4" Hub PVC Floor Sink w/ 3/4" Grate Dome Strainer

4" Hub PVC Floor Sink w/ 3/4" Grate Flat Strainer

4" Hub PVC Floor Sink w/ Full Grate Dome Strainer

4" Hub PVC Floor Sink w/ Full Grate Flat Strainer

4″ Inflatable Test Ball Design Features: Can Conform to Irregular Pipe Sizes 3 Year Warranty Domestic Print / View Specs PDF Operating Specifications:Max Back Pressure:Water Head: 30’ Air: 13 psig Use: For testing pipelines or totemporarily...

4″ Insert x 6″ Long PVC Closet Flange with SS Ring      

4″ IP White Plastic Floor & Ceiling Plate      

4" IPS Asbestos Free Full Face Gasket 1/16" Thick FITS 4″ IRON PIPE. ASBESTOS FREE FULL FACE GASKET MEETS ASTM F152, F36A, F146, 1/16″ THICK. 150 LBS. MAY BE USED FOR STEAM APPLICATIONS.  

4" IPS Asbestos Free Ring Gasket FITS 4″ IRON PIPE. ASBESTOS FREE RING GASKET MEETS ASTM F152, F36A, F146, 1/16″ THICK. 150 LBS. MAY BE USED FOR STEAM APPLICATIONS.  

  Print / View Specs PDF      

4" IPS PVC Compression (Dresser) Coupling 4″ IRON PIPE SIZE. 12″ LENGTH. MAXIMUM PRESSURE: 125 PSI. MUST BE RESTRAINED ON BOTH ENDS.  

4" IPS PVC Countersunk Cleanout Plug

4" IPS PVC Expandable Repair Coupling 4″ IRON PIPE SIZE, 14-1/2″ LENGTH, MAXIMUM EXTENSION: 4-3/16″, HEAVY DUTY PVC CONSTRUCTION WITH DOUBLE O-RING BUNA-N-SEAL. RATED @ 150 PSI @ 72 DEGREES FAHRENHEIT. DESIGNED FOR SOLVENT WELD...

4" IPS PVC Extension Cover Plug w/ 1/4" Brass Insert 1/4″ x 20tpi brass insert

4" IPS S.C. Countersunk Brass Cleanout Plug 4″ IRON PIPE SIZE. SOUTHERN CODE. COUNTERSUNK SQUARE HEAD.

4" IPS Short Galvanized Compression (Dresser) Coupling MADE OF MALLEABLE IRON. 125 PSI 120 DEGREES FAHRENHEIT. COMES WITH RUBBER GASKETS & METAL WASHERS. ALL COMRESSION COUPLING MUST BE RESTRAINED ON ENDS.

4" IPS Southern Code Raised Head Brass Cleanout Plug 4″ IRON PIPE SIZE. SOUTHERN CODE. RAISED SQUARE HEAD.

4" IPS x 3" S.S. 1-Bolt Repair Clamp Fits 4″ iron pipe size/ schedule 40. 3″ length. Type 301 stainless steel shield. Plated malleable iron lugs (ASTM A47 Grade 32610). High content neoprene gasket with temperature range of -40 to 212...

4" IPS x 6" S.S. 2-Bolt Repair Clamp Fits 4″ iron pipe size/ schedule 40. 6″ length. Type 301 stainless steel shield. Plated malleable iron lugs (ASTM A47 Grade 32610). High content neoprene gasket with temperature range of -40 to 212...

4″ Krausz Hymax Coupling      

4" Lead Fit-All Plug FITS 4″ PIPE. CAST IRON CORE.

4″ Lead Fitall Plug Design Features: Lead Construction Imported Print / View Specs PDF  

4″ Light Duty Copper-Plated Clevis Hanger Design Features: Steel Construction Copper Plated Domestic Print / View Specs PDF

4″ Light Duty Steel Clevis Hanger Design Features: Steel Construction Domestic Print / View Specs PDF

4" No Hub Cast Iron Backwater Valve Fits no hub or plastic pipe. 12-3/4″ length. Reduces backflow in drainage system. All neoprene gaskets. 300 series stainless bolts and washers. Repairable in service.  

4" No Hub Cast Iron Drain Base for 3-1/2" Spud (7" Pan) 4″ No Hub connection. 7″ pan diameter. 1/2″ primer tapped. Stainless steel bolts. Fits 3-1/2″ spud. With clamping ring.  

4" No Hub Cast Iron Tapped Screw Ferrule w/ 3-1/2" Tapping Size Fits 4″ pipe size. 3-1/2″ tapping size. No hub connection. 2-1/8″ height. Standard weight. Does not come with a plug. Made of HT200 cast iron.

4" No-hub Cast Iron White Porcelain Floor Sink Less Grate 12″Lx12″Wx6″D. White porcelain coated cast iron. Aluminum dome bottom strainer included.  

4" No-Hub Coupling No-hub couplings are used to join no-hub cast iron soil pipe and fittings. Made in accordance with Cast Iron Soil Pipe Institute Standard (CISPI) #310. Couplings are shipped as assemble units. Stainless steel corrugated shield and...

4″ No-Hub Dandy Tee With Plug