Mfg. Catalogs

3" IPS Short Galvanized Compression (Dresser) Coupling 4″ LENGTH. MADE OF MALLEABLE IRON. 125 PSI 120 DEGREES FAHRENHEIT. COMES WITH RUBBER GASKETS & METAL WASHERS. ALL COMPRESSION COUPLING MUST BE RESTRAINED ON ENDS.

3" IPS Southern Code Raised Head Brass Cleanout Plug 3″ IRON PIPE SIZE. SOUTHERN CODE. RAISED SQUARE HEAD.  

3" IPS x 3" S.S. 1-Bolt Repair Clamp FITS 3″ IRON PIPE SIZE. 3″ LENGTH. TYPE 301 STAINLESS STEEL SHEILD. PLATED MALLEABLE IRON LUGS. HIGH CONTENT NEOPRENE GASKETS. PLATED LONG NECK CARRIAGE BOLT AND NUT. NOT DESIGNED FOR HOT WATER LINES. ...

3" IPS x 6" S.S. 2-Bolt Repair Clamp Fits 3″ iron pipe size/ schedule 40. 6″ length. Type 301 stainless steel shield. Plated malleable iron lugs (ASTM A47 Grade 32610). High content neoprene gasket with temperature range of -40 to 212...

3″ Krausz Hymax Coupling      

3" Lead Fit-all Plug Top of threads are 3″ across, bottom are 2 13/16″ across. Threads are 3/4″ long

3″ Lead Fitall Plug Design Features: Lead Construction Imported Print / View Specs PDF  

3″ Light Duty Copper-Plated Clevis Hanger Design Features: Steel Construction Copper Plated Domestic Print / View Specs PDF

3″ Light Duty Steel Clevis Hanger Design Features: Steel Construction Domestic Print / View Specs PDF  

3″ Long Galvanized Compression Coupling Design Features: Malleable Iron Construction Galvanized Finish Imported Print / View Specs PDF Operating Specifications:Temperature: 120° FPressure: 125 PSI

3″ Main X 1 1/4″ SDR-11 Saddle Air Eliminator Design Features: Continental’s Patented “ID Seal” For Underground PE Pipe (ASTM D 2513) Only 316 Stainless Steel Bolts, Washers & Inserts Made in the USA Print / View Specs...

3″ Main X 1″ SDR-11 Saddle Air Eliminator Design Features: Continental’s Patented “ID Seal” For Underground PE Pipe (ASTM D 2513) Only 316 Stainless Steel Bolts, Washers & Inserts Made in the USA Print / View Specs PDF ...

3″ Main X 2″ IPS SDR-11 Saddle Air Eliminator Design Features: Continental’s Patented “ID Seal” For Underground PE Pipe (ASTM D 2513) Only 316 Stainless Steel Bolts, Washers & Inserts Made in the USA Print / View Specs...

3″ Main X 3/4″ SDR-11 Saddle Air Eliminator Design Features: Continental’s Patented “ID Seal” For Underground PE Pipe (ASTM D 2513) Only 316 Stainless Steel Bolts, Washers & Inserts Made in the USA Print / View Specs...

3" MPT Drum Trap Cover FITS 3″ MALE PIPE THREADS. 4″ FLANGED DIAMETER. CHROME PLATED ZINC DIE CAST. FLANGED WITH GASKET

3" No Hub Cast Iron Backwater Valve Fits no hub or plastic pipe. 11-3/4″ length. Reduces backflow in drainage system. All neoprene gaskets. 300 series stainless bolts and washers. Repairable in service.  

3" No Hub Cast Iron Drain Base for 3-1/2" Spud (7" Pan) 3″ No Hub connection. 7″ pan diameter. 1/2″ primer tapped. Stainless steel bolts. Fits 3-1/2″ spud. With clamping ring.  

3" No Hub Cast Iron Slab Drain Base for 3-1/2" Spud (7" Pan) 3″ No Hub connection. 7″ pan diameter. 1/2″ primer tapped w/ brass plug. Stainless steel bolts. Fits 3-1/2″ spud. Less clamping ring.  

3" No Hub Cast Iron Tapped Screw Ferrule w/ 2-1/2" Tapping Size Fits 3″ pipe size. 2-1/2″ tapping size. No hub connection. 2-1/8″ height. Standard weight. Does not come with a plug. Made of HT200 cast iron.

3" No-hub Cast Iron White Porcelain Floor Sink Less Grate 12″Lx12″Wx6″D. White porcelain coated cast iron. Aluminum dome bottom strainer included.  

3" No-Hub Coupling No-hub couplings are used to join no-hub cast iron soil pipe and fittings. Made in accordance with Cast Iron Soil Pipe Institute Standard (CISPI) #310. Couplings are shipped as assemble units. Stainless steel corrugated shield and...

3″ No-Hub Dandy Tee With Plug      

3" OD 24 Gauge Stainless Steel Extension Cover 3″ outside diameter. Cleanout access wall cover.

3" Plastic Fitting Saver Tool Repairs sockets/hubs of PVC, ABS, DWV pipe, fittings, and PVC ball valves below slab or sub floor.  

3" Pneumatic Clean-out Test Tee Plug Designed for testing plumbing lines above the cleanout tee. Design of plug will allow for passing of test water or air by deflating the plug. Threads directly into test tee. Threads into both cast iron and plastic...

3″ Polypropylene Termination Screen      

3″ Push-On Cleanout Less Gasket (Service Weight) with Countersunk Plug      

3″ Push-On Cleanout Less Gasket (Service Weight) with Raised Head Plug      

3" Putty Knife w/ Durable Plastic Handle 3″ PUTTY KNIFE – STAINLESS STEEL WITH DURABLE PLASTIC HANDLE.  

3″ PVC “Push-2-Set” Closet Flange Design Features: PVC Construction Ribbed Gasket fits insideSchedule 40 PVC Print / View Specs PDF

3″ PVC “Twistee” Push-In Closet Flange        

3″ PVC Backwater Valve Print / View Specs PDF      

3" PVC Ball Valve- Solvent Weld ONE PIECE CONSTRUCTION. EPDM SEATS. EPDM O-RINGS. SUITABLE FOR SWIMMING POOLS. 1/4 TURN OPERATION. RATED AT 150 PSI. SOLVENT ENDS COMPLY WITH ASTM D2466. NOT FOR USE WITH COMPRESSED AIR.  

3″ PVC Cleanout Plug With Screw      

3" PVC Closet Flange Less Knockout FITS INSIDE OF 3″ DWV PIPE. HAS TWO MOUNTING SLOTS TO ALLOW PRECISE ALIGNMENT OF WATER CLOSET. FITS FLUSH WITH FLOOR.  

3" PVC Closet Flange w/ 6" Barrell and Adj Plastic Ring  

3" PVC Closet Flange w/ Knockout 3″ PVC CLOSET FLANGE WITH KNOCKOUT / FITS INSIDE OF 3″ DWV PIPE. HAS TWO MOUNTING SLOTS TO ALLOW PRECISE ALIGNMENT OF WATER CLOSET. FITS FLUSH WITH FLOOR.  

3″ PVC Coated DWV Hanger Design Features: Steel Construction Steel Construction Domestic Print / View Specs PDF Operating Specifications:Temperature Max: 150° FMax Rec Load: 150 lbs.Tensile Strength: 2400Elongation %: 375

3″ PVC Countersunk Cleanout Plug      

Strainer For Pittsburgh Trap