Bath

2-1/4" Heavy Brass Shower Head- Chrome Plated 1/2″ FIP connection. Flow 2.5 GPM @ 80 PSI. Side lever to adjust spray.  

2-3/16" MPT x 1-7/8" FPT Drain Bushing for Kohler 2-3-16 18 tpi x 1-7/8″ 14 tpi threaded brass bushing for Kohler bath drain. 15/16″ tall.  

2-Hole Overflow Face Plate w/ Screws- Chrome Plated Chrome plated zinc diecast. Comes with screws. 3.25″ outside diameter.  

3" Tub Spout Extender- Chrome Plated CHROME PLATE FINISH  

3/8" Toe Touch Cartridge/ Stopper- Chrome Plated. 3/8″ Brass stem.  

36" Adjustable Ceiling Support For 1" Shower Rod COMES WITH 36″ ROD, FLANGE, 1″ RING & SCREWS  

4" Rainstyle Showerhead- Chrome Plated 2.75 GPM AT 20 TO 100 PSI. 1/2″ FIP CONNECTION  

4-3/4" Tub Spout Extender- Chrome Plated CHROME PLATED FINISH  

5' x 1" OD "D" Bar Curtain Rod w/ 24" Ceiling Support and Flange POLISHED ALUMINUM. 4PCS. 26″ WIDE X 5′ LONG  

5' x 1" OD "L" Bar Curtain Rod (26"Wx60"L)w/ Support and Flange- POLISHED ALUMINUM. 2PCS- 26″ WIDE X 5′ LONG  

5/16" Toe Touch Cartridge/ Stopper- Chrome Plated. 5/16″ BRASS STEM  

6' X 1" OD "L" BAR CURTAIN ROD POLISHED ALUMINUM. 2PCS- 48″ WIDE X 6′ LONG  

65" Brass Riser For AAS & AASDSR

7" Length (1/2cts) Long Tub Spout with Front Diverter Zinc die cast. 1/2″ copper slip connection. 2-3/4″ minimum nipple length from wall. 4-1/4″ maximum nipple length from wall. 2-7/16″ OD of spout at wall. Width at nose of spout...

7" Length (1/2ips) Long Tub Spout with Nose Connection Zinc die cast. 1/2″ connection at nose end of spout. 4-1/4″ maximum nipple length from wall. 2-7/16″ OD of spout at wall. Width at nose of spout is 1-7/8″.  

7" x 7" Mini Tub/Shower Splash Guards (pair) White Polystyrene. Self adhesive strips. Make sure area is clean where adhesive will be applied. Caulking may be desired.  

72" Handheld Shower Hose (1/2" FIP x 1/2" FIP) 1/2″ FIP x 1/2″ FIP threaded connections.  

8-1/2" Two Piece Tub Spout w/ Nose Diverter- Chrome Plated 1/2″ MIP CONNECTION AT WALL-END OF SPOUT  

9" Cast Brass Long Tub Spout Over the Rim- Chrome Plated Solid heavy cast brass. Over the rim. No diverter. 9″ Spout length. One piece. Will fit 1/2″ IPS at nose connection.  

ACRYLIC TOWEL RING W/ EXPOSED SCREWS CHROME PLATED ZINC DIE CAST. COMES W/ SCREWS. QUICK INSTALLATION.  

Add-A-Shower Bathcock Diverter- Code Pattern

Add-A-Shower Diverter Spout & 61" Riser (3/8" IPS) 61″ RISER (3/8″ IPS), SHOWER HEAD 2.5 GPM @ 80 PSI LESS SHOWER ROD  

Adjustable Tub Spout w/ Nose Diverter- Chrome Plated 5-3/8″ Length zinc body. Adjusts up to 1″. 1/2″ or 3/4″ IPS connection (with reducing bushing).  

Adjustable Wall Bracket for #AAS

Brass Fiberglass Shower Elbow (1/2" FIP) 1/2″ female sweat or 1/2″ MIP inlet. 1/2″ FIP outlet. Made of brass with yellow zinc plated nuts.  

Brass Shower Diverter Valve (Button Type )- Chrome Plated SHOWER DIVERTER VALVE (BUTTON TYPE )- CHROME PLATED -CHROME PLATED BRASS.  

COMMERCIAL DOUBLE TISSUE HOLDER W/ EXPOSED SCREWS- CHROME PLATED 10.5″ WIDE X 2-3/8″ HIGH X 4-1/4″ DEEP  

Commercial Single Tissue Holder w/ Exposed Screws- Chrome Plated 5-1/2″wide x 2-3/8″ high x 4-1//4″ deep. Push button arm release.  

Conversion Bar w/ Screws For One Hole Faceplate

Cover Plate for 2 Handle Shower- Chrome Plated Two hole. Made of polished stainless steel. 1-3/8″ hole diameter. Conceals damaged/ cracked tiles. Do not use abrasive cleaners.  

Cover Plate for 3-Handle Shower Diverter- Chrome Plated Three hole. Made of polished stainless steel. 1-3/8″ hole diameter. Conceals damaged/ cracked tiles. Do not use abrasive cleaners.  

Deluxe Massage Showerhead (1/2" IPS) CHROME PLATED ABS BODY, BRASS BALL JOINT, GRAY FACE WITH SELF-CLEANING SPRAY JETS  

Double Offset Bath Supplies for Leg Tub Faucet- Chrome Plated Chrome plated brass. 1/2″ OD x 21-1/2″ w/ bell flanges. Comes with 2pcs of each: supply lines, nuts, washers and bell flanges.  

Double Robe Hook w/ Concealed Screw- Chrome Plated CHROME PLATED ZINC DIE CAST. COMES W/ SCREW. QUICK INSTALLATION.  

Fit-all Drain Protector 3-1/8″ W/ CLIP ON BOTTOM. ALUMINUM  

Fixed Wall Bracket for #AASDSR

FLIP-IT TUB STOPPER- CHROME PLATED FITS DRAINS 1-3/8″ TO 1-5/8″  

Hand Held Shower w/ Holder & 59" Hose Three position adjustable spray  

HYDRA (PULSATING) SHOWER HEAD- CHROME PLATED 1/2″ FIP CONNECTION. 2.5 GPM @ 80 PSI  

Installation Clamp for Recessed Wall Fixtures- Chrome Plated CHROME PLATED ZINC DIE CAST