Fittings

3/8" MPT Bronze Countersunk Plug 3/8″ MALE PIPE THREADS, CAST BRONZE.  

3/8" MPT Bronze Raised Head Plug- Lead Free 3/8″ male pipe threads. Made of cast bronze (red brass). Maximum working pressure: 150psi at 400 degrees Fahrenheit WSP (Water Steam Pressure). 200 psi WOG (Water Oil Gas) at -20 degrees F to 150 degrees...

3/8" MPT x 1/4" FPT Bronze Hex Bushing- Lead Free 3/8″ male pipe threads x 1/4″ female pipe threads. Cast bronze. Max working pressure= 125 PSI steam pressure (W.S.P). 200PSI nonshock cold water, oil or gas (W.O.G.) Materials meet ASTM B...

3/8" MPT x 1/8" FPT Bronze Hex Bushing- Lead Free 3/8″ male pipe threads x 1/8″ female pipe threads. Cast bronze. Max working pressure= 125 PSI steam pressure (W.S.P). 200PSI nonshock cold water, oil or gas (W.O.G.) Materials meet ASTM B...

3/8" O.D. Brass Compression Union- Chrome Plated- Lead Free 3/8″ OUTSIDE DIAMETER. TEMPERATURE RANGES FROM -65 TO 250 DEGREES FAHRENHEIT. USED WITH COPPER, BRASS & ALUMINUM TUBING, LOW AND MEDIUM AIR, WATER AND OIL PRESSURE LINES.  

3/8" O.D. x 5/8" O.D. Brass Compression Union - Chrome Plated 3/8″ X 5/8″ OUTSIDE DIAMETER. TEMPERATURE RANGES FROM -65 TO 250 DEGREES FAHRENHEIT. USED WITH COPPER, BRASS & ALUMINUM TUBING, LOW AND MEDIUM AIR, WATER AND OIL PRESSURE...

3/8" OD Flare x 1/2" FIP Brass Gas Connector Adapter BRASS FLARE GAS FITTING. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines,...

3/8" OD Flare x 1/2" MIP (3/8" FIP tapped) Brass Gas Connector Adapter BRASS FLARE GAS FITTING. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum...

3/8" OD Flare x 3/8" FIP Brass Gas Connector Adapter BRASS FLARE GAS FITTING. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines,...

3/8" OD Flare x 3/8" MIP Brass Gas Connector Adapter BRASS FLARE GAS FITTING. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines,...

3/8" OD Plastic Push-on Elbow

3/8" OD Push-on Straight Valve

3/8" OD x 1/2" (5/8") SWT Brass Compression Adapter- Chrome Plated 3/8″ OUTSIDE DIAMETER X 1/2″ FEMALE SWEAT THREADS. TEMPERATURE RANGES FROM -65 TO 250 DEGREES FAHRENHEIT. USED WITH COPPER, BRASS & ALUMINUM TUBING, LOW AND MEDIUM AIR,...

3/8" OD x 1/2" FPT Brass Compression Elbow- Chrome Plated - Lead Free Lead Free- 3/8″ OUTSIDE DIAMETER X 1/2″ FEMALE PIPE THREADS. TEMPERATURE RANGES FROM -65 TO 250 DEGREES FAHRENHEIT. USED WITH COPPER, BRASS & ALUMINUM TUBING, LOW AND...

3/8" OD x 1/2" FPT Brass Compression Coupling - Chrome Plated 3/8″ OUTSIDE DIAMETER X 1/2″ FEMALE PIPE THREADS. TEMPERATURE RANGES FROM -65 TO 250 DEGREES FAHRENHEIT. USED WITH COPPER, BRASS & ALUMINUM TUBING, LOW AND MEDIUM AIR, WATER...

3/8" OD x 1/2" MPT Brass Compression Coupling- Lead Free- Chrome Plated 3/8″ OUTSIDE DIAMETER X 1/2″ MALE PIPE THREADS. TEMPERATURE RANGES FROM -65 TO 250 DEGREES FAHRENHEIT. USED WITH COPPER, BRASS & ALUMINUM TUBING, LOW AND MEDIUM AIR,...

3/8" OD x 1/2" MPT Brass Compression Elbow- Chrome Plated 3/8″ OUTSIDE DIAMETER X 1/2″ MALE PIPE THREADS. TEMPERATURE RANGES FROM -65 TO 250 DEGREES FAHRENHEIT. USED WITH COPPER, BRASS & ALUMINUM TUBING, LOW AND MEDIUM AIR, WATER AND OIL...

3/8" OD x 3/4" FHT Elbow Fitting less nut/ferrule- Lead Free THIS FITTING REPLACES EXISTING 3/8″ MPT ELBOW  

3/8" OD X 3/8" FPT Brass Compression Coupling- Chrome Plated 3/8″ OUTSIDE DIAMETER X 3/8″ FEMALE PIPE THREADS. TEMPERATURE RANGES FROM -65 TO 250 DEGREES FAHRENHEIT. USED WITH COPPER, BRASS & ALUMINUM TUBING, LOW AND MEDIUM AIR, WATER...

3/8" OD x 3/8" MIP Plastic Push-on Male Adapter

3/8"x1/4" Threaded Yellow Brass Hex Bushing- Lead Free

3/8"x1/8" Threaded Yellow Brass Hex Bushing- Lead Free  

4" (C X MPT) WROT MALE ADAPTER 4″ COPPER SWEAT X 4″ MALE PIPE THREADS. WROT COPPER.  

4" x 2" PVC Plastic Saddle Tee Kit Solvent Welds to 4″ schedule 40 DWV pipe. Inlet accepts 1-1/2 or 2″ schedule 40 pipe. Use bushing to reduce from 2″ to 1-1/2″. Includes V-bolts, nuts and washers.  

4" x 3" PVC Plastic Saddle Tee Kit Solvent Welds to 4″ schedule 40 DWV pipe. Inlet accepts 3″ schedule 40 pipe. Includes V-bolts, nuts and washers.  

4" x 4" PVC Plastic Saddle Tee Kit Solvent welds to 4″ schedule 40 DWV pipe. Inlet accepts 4″ schedule 40 pipe. Includes V-bolts, nuts and washers.  

5/16" X 5/16" Brass Hose Barb Splicer

5/8" BARB X 1/2" MPT BRASS ELBOW

5/8" Barb x 3/4" MHT Hose Barb

5/8" Barb X 5/8" Barb Garden Hose Coupling

5/8" Flare X 3/4" FPT Brass Elbow 5/8″ flare threads x 1/2″ female pipe threads. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum...

5/8" Flare x 3/8" MPT Brass Half Union Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines, LP and natural gasolines,...

5/8" OD Brass Compression Tee- Lead Free 5/8″ X 5/8″ X 5/8″ OUTSIDE DIAMETER. TEMPERATURE RANGES FROM -65 TO 250 DEGREES FAHRENHEIT. USED WITH COPPER, BRASS & ALUMINUM TUBING, LOW AND MEDIUM AIR, WATER AND OIL PRESSURE LINES. ...

5/8" x 1/2" Flare Brass Short Forged Reducing Nut Style 41. 5/8″ flare threads x 1/2″ outside threads. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease...

6" (C X C X C) WROT TEE 6″ COPPER SWEAT X 6″ COPPER SWEAT X 6″ COPPER SWEAT. WROT COPPER.  

6" (CXC) Wrot 45 Degree Elbow 6″ COPPER SWEAT X 6″ COPPER SWEAT. WROT COPPER.  

6" (CXC) Wrot Copper 90 Degree Elbow 6″ COPPER SWEAT X 6″ COPPER SWEAT. WROT COPPER.  

6" (CXC) WROT COUPLING WITH ROLLED TUBE STOP 6″ COPPER SWEAT X 6″ COPPER SWEAT. WROT COPPER.  

7/8" Flare Brass Short Nut (style 41S) 7/8″ flare threads. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines, LP and...

8" (CXC) Wrot 45 Degree Elbow 8″ COPPER SWEAT X 8″ COPPER SWEAT. WROT COPPER.