Braxton Harris

1-1/4" x 3/4" Brass Urinal Spud For urinal. Brass body & locknut w/ rubber washer and galvanized friction ring.  

1-1/4" Brass Closet Spud Brass body and locknut with rubber washer and galvanized friction ring.  

1-1/2" x 3/4" Brass Urinal Spud For urinal. Brass body & locknut w/ rubber washer and galvanized friction ring.  

1-1/2" x 1-1/4" Brass Closet Spud Brass body and locknut with rubber washer and galvanized friction ring.  

1-1/2" Brass Closet Spud Brass body and locknut with rubber washer and galvanized friction ring.  

36" Adjustable Ceiling Support For 1" Shower Rod COMES WITH 36″ ROD, FLANGE, 1″ RING & SCREWS  

1" x 3/4" Brass Urinal Spud For urinal. Brass body & locknut w/ rubber washer and galvanized friction ring.  

Mirror Finish Cover Plate For Tub Spout COVERS UNWANTED VALVE CUT-OUT HOLES  

Mirror Finish Cover Plate for 3-hole Tub/Shower Valve COVERS UNWANTED VALVE CUT-OUT HOLES  

Cover Plate for 3-Handle Shower Diverter- Chrome Plated Three hole. Made of polished stainless steel. 1-3/8″ hole diameter. Conceals damaged/ cracked tiles. Do not use abrasive cleaners. ...

Mirrored Acrylic Cover Plate for 2-Handle Shower Diverter

Cover Plate for 2 Handle Shower- Chrome Plated Two hole. Made of polished stainless steel. 1-3/8″ hole diameter. Conceals damaged/ cracked tiles. Do not use abrasive cleaners.  

Mirror Finish 1-Hole Cover Plate for Tub/ Shower Valve COVERS UNWANTED VALVE CUT-OUT HOLES  

S.S. Cover Plate for 1-Handle Shower Diverter One hole. Made of polished stainless steel. 5-1/8″ diameter. Conceals damaged/ cracked tiles. Do not use abrasive cleaners.  

1-1/4" X 5" PLASTIC C.O. PLUG- CHROME PLATED 1 PIECE CHROME PLATED ABS WITH NO OVERFLOW.  

1-1/4"x 8" Comm. Lavatory Grid Drain No O.F.- Chrome Plated ALL PARTS FINISHED. 17 GAUGE TUBULAR. 6″ TAILPIECE WITH BRASS LOCKNUT & MACK WASHER. COMES WITHOUT OVERFLOW.  

1-1/4" x 8.25" Comm. Lavatory Grid Drain 17ga- Chrome Plated 6″ length 17 gauge tailpiece. Comes with brass locknut mack washer and friction washer. 18 tpi (threads per inch).  

1/2" FIP Heavy Brass Tub Spout w/ Back Diverter Chrome plated cast brass. 3/4″ male pipe thread connection with 1/2″ bushing at wall end of spout.  

2-1/4" Heavy Brass Shower Head- Chrome Plated 1/2″ FIP connection. Flow 2.5 GPM @ 80 PSI. Side lever to adjust spray.  

1-3/4" Heavy Brass Shower Head- Chrome Plated 1/2″ FIP CONNECTION 2.5 GPM @ 80 PSI  

1" Basin/ Lavatory Crumb Cup Made of stainless steel. 3/4″ deep. Removable.  

3/4" FPT Hose Bibb Vacuum Breaker w/ Set Screw BRASS HOSE BIBB BACKFLOW PREVENTER W/ SET SCREW & FLAT RUBBER WASHER. CSA B64.2 APPROVAL, UPC APPROVAL, ASSE 1011, 125 PSI, 180 DEGREES FAHRENHEIT ...

Heavy Pattern Basin Faucet w/ Hot & Cold Button, Round Handle- Lead Free CHROME PLATED CAST BRASS.  

1-1/4" IPS Bell Flange- Chrome Plated 3″ OD.  

1-3/8" OD (Tubular) Deep Bell Flange- Chrome Plated

Basin Faucet w/ Hot and Cold Button (1/2" MIP) - Lead Free CHROME PLATED CAST BRASS. CROSS HANDLES  

1-1/4" Bath Drain Trim Less Stopper- Chrome Plated CHROME PLATED BRASS. 16 THREADS. (FINE)  

1-1/2" Bath Drain Trim Less Stopper CHROME PLATED BRASS. 11-1/2 THREADS. (COARSE)  

100' Beaded Chain on a Reel 3/16". Trade Size # 10 100′ Beaded chain on a reel 3/16″. Trade size #10. Nickel plated brass.  

ACRYLIC TOWEL RING W/ EXPOSED SCREWS CHROME PLATED ZINC DIE CAST. COMES W/ SCREWS. QUICK INSTALLATION.  

1" x 6' ALUMINUM ANGLED SHOWER ROD 1″ OUTSIDE DIAMETER X 6′ LENGTH. MADE OF ALUMINUM.  

1" x 5' Aluminum Angled Shower Rod 1″ OUTSIDE DIAMETER X 5′ LENGTH. MADE OF ALUMINUM.  

1/2" IPS x 10" Length Adjustable Shower Arm

Small Air Admittance Valve (Ayrlett) (20 DFU 1-1/2" or 2" Pipe) Fits 1-1/2″ and 2″ Pipe sizes. Vents up to 160 DFU on a branch and up to 20 DFU on a stack. Can be used as an individual,...

Leg Tub Add-a-Shower Unit w/ 24" X 42" Rectangular Rod COMES WITH CHROME PLATED 2.5 GPM SHOWER HEAD, DIVERTER SPOUT & SUPPORTS . 61″ RISER (3/8″ IPS) WITH 12″ ROD AND RISER...

65" Brass Riser For AAS & AASDSR

Fixed Wall Bracket for #AASDSR

Add-A-Shower Diverter Spout & 61" Riser (3/8" IPS) 61″ RISER (3/8″ IPS), SHOWER HEAD 2.5 GPM @ 80 PSI LESS SHOWER ROD  

Replacement Diverter Spout for Add-a-shower (#AASDSR)  

Add-A-Shower Bathcock Diverter- Code Pattern