Blasting Pot Replacement Parts & Service Kits

The 1” Outlet Valve allows the blast pot to depressurize when the remote control switch is released. This Outlet Valve is a component part in the 125P and 125E Remote Control Systems. 1" Outlet Valve Documents: Allredi 125P Remote Control...

1" blast pot pusher line assembly with two 1" female swivels, two 1" T-bolt hose clamps, and 3' x 1" ID air hose. For 6.5 cu ft and smaller blast pots with a 1" pipe string. 1" Pusher Line Assembly Two 1" Female Swivels Two 1" T-Bolt Clamps 3' x 1"...

The GateKeeper Air Valve activates and deactivates the flow of compressed air without depressurizing the blast pot. The 1-1/2" GateKeeper Air Valve is a component part of the pressure-hold 130P and 130E Remote Control Systems. 1-1/2" GateKeeper Air...

The GateKeeper Air Valve activates and deactivates the flow of compressed air without depressurizing the blast pot. The 1-1/2" High Flow GateKeeper Air Valve is a component part of the pressure-hold 130P and 130E Remote Control Systems and has a larger...

The 1-1/2” inlet valve allows a larger volume of air to flow into the blasting system. The Allredi 1-1/2" Inlet Valve is a component part in the 125P and 125E Remote Control Systems. 1-1/2" Inlet Valve Documents: Allredi 125P Remote Control...

1-1/2" blast pot pusher line assembly with two 1-1/2" female swivels, two 1-1/2" T-bolt hose clamps, and 3' x 1-1/2" ID air hose. For 6.5 cu ft and smaller blast pots with a 1-1/2" pipe string. 1-1/2" Pusher Line Assembly Two 1-1/2" Female Swivels...

The GateKeeper Air Valve activates and deactivates the flow of compressed air without depressurizing the blast pot. The 1" GateKeeper Air Valve is a component part of the pressure-hold 130P and 130E Remote Control Systems. 1" GateKeeper Air Valve,...

1-1/4" blast pot pusher line assembly with two 1-1/4" female swivels, two 1-1/4" T-bolt hose clamps, and 3' x 1-1/4" ID air hose. For 6.5 cu ft and smaller blast pots with a 1-1/4" pipe string. 1-1/4" Pusher Line Assembly Two 1-1/4" Female Swivels...

1/2" Flat Washer for 0.35 Cu. Ft. Axle Assembly  

1/2" ID x 10 Ft. Black Heavy-Duty Abrasive Blasting Hose with 10L174

1/2" ID x 25 Ft. Black Heavy-Duty Abrasive Blasting Hose with 10L174

1/2" ID x 50 Ft. Black Heavy-Duty Abrasive Blasting Hose with 10L174

1/2" NPT Full Port Ball Valve. Assembly part for Allred L-Series Blast Pots. 1/2" NPT Full Port Ball Valve

1/2" NPT Union

1/2-20 Hex Nut

1/8" Male NPT Petcock for small moisture separators commonly mounted on Allredi L-Series Blast Pots 1/8" Male NPT Petcock

1/8" NPT Pressure Gauge 160 psi

2 and 4 Hole Jr. - Cover Bolt without Pin

Complete Allredi 2-Hole Junior Mixing Valve for Allredi L-Series Blast Pots Allredi 2-Hole Junior Mixing Valve, Complete Documents: Allredi 2-Hole Junior Mixing Valve - Part Numbers & Schematics Guide - 106M431 Allredi 2-Hole Junior Mixing...

3/16" X 1" Roll Pin  

3/4" ID x 25 Ft. Black Heavy-Duty Abrasive Blasting Hose with 10L366HE

3/4" ID x 50 Ft. Black Heavy-Duty Abrasive Blasting Hose with 10L366HE

3/8" Lock Washer Galvanized

3/8-24 x 1" Grade 5 Bolt

3/8-24 x 1-1/4" Grade 5 Bolt

5/16" Flat Washer Galvanized

5/16-24 x 3/4" Grade 5 Bolt

6" x 8" Inspection Door Assembly for Allredi Blast Pots 6" x 8" Inspection Door Assembly Red Includes door, bolt, nut, and brace Documents: Allredi 6.5 M-Series Blast Pots - Part Numbers & Schematics Guide - 106M058

An Abrasive Trap filters small abrasive particles exhausting from the blast pot, protecting the outlet valve from premature wear. The Allredi Abrasive Trap is a component part in the 125P and 125E Remote Control Systems Abrasive Trap Documents: ...

Replacement screen for the Allredi Abraive Trap. The screen traps the small particles escaping the blast pot during depressurization and prolongs the life of the abrasive trap body. Abrasive Trap Screen Documents: Allredi 125P Remote Control...

A blast pot exhaust muffler reduces the noise and traps particles generated during the depressurization process of a blast pot. Blast Pot Exhaust Muffler Aluminum body Steel Mesh Screen HDPE Element Galvanized pipe fittings Documents: Allredi...

Blow Down Assembly  

Control lever bracket for Allredi L-Series Blast Pots. Two required. Control Lever Bracket for Allredi L-Series Blast Pots Two required

Control Lever Grip - All  

Control Link for 1.0/1.5 Cu. Ft. Machine

Control Link Pivot Assembly  

Male Hose End Fitting for 1" ID Blast Hose Male hose end for 1" ID blast hose Steel For L-Series blast pots Includes 10L66RR o-ring and 10L800237 rubber liner

Cover Bolt with Pin for 2- and 4-Hole Jr.  

Cover for Blastmaster® 153 Remote Control Valve