Grooved Fittings

Standard Rigid Couplings Ductile Iron construction. Non-lead orange paint Standard Gasket: Pre-Lubricated Grade E EPDM (Type A) Conforms to ASTM A536 UL listed, FM Approved  Standard Rigid Coupling Data Sheet PDF Grooved Catalog PDF Suitable for...

49 Sandwich Plate - Electro Zinc Plated The Model #7041, #7043, #C341 & #A512 flange adapters require a hard flat surface for effective gasket sealing. A sandwich plate is required and should always be used when the mating surface is not adequate as...

55 Grooved Nipple Adapter Great item for tranistioning from pipe thread to grooved. Shurjoint ductile iron grooved-end fittings are made of ductile iron per ASTM A536 Gr.65-45-12 and or ASTM A395 Gr. 65-45- 15. C-E dimensions are manufacturer’s...

7001SS Stainless Steel Flexible Coupling 316SS The Figure 7001SS Flexible Coupling is a Stainless Steel coupling made of ASTM A-743/A743M cast stainless steel which is the cast equivalent to 316 Stainless Steel. It is designed for installation on...

7041 Flange Adapter - ANSI Class 125/150 The Model 7041 Flange Adapter allows for a direct connection with ANSI class 125/150 flanges. The specially designed gasket enables the transition from a grooved system to a flanged system or component with this...

7043 Flange Adapter - ANSI Class 300 The Model 7043 flange adapter allows for a direct connection with ANSI Class 300 flanges. The specially designed gasket enables the transition from a grooved system to a flanged system or component with this single...

7111 45° Grooved Elbow - Regular Radius Shurjoint grooved-end elbows are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. Shurjoint standard fitting pressure ratings...

7112 22-1/2° Grooved Elbow Shurjoint grooved-end elbows are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. Shurjoint standard fitting pressure ratings conform to the...

7113 11-1/4° Grooved Elbow Shurjoint grooved-end elbows are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. Shurjoint standard fitting pressure ratings conform to the...

7120 Grooved Tee Shurjoint grooved-end fittings are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. Shurjoint standard fitting pressure ratings conform to the ratings of...

7121 Grooved Reducing Tee Shurjoint grooved-end reducing tees are made of ductile iron per ASTM A536 Gr. 65-45-12 andor ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. For sizes larger than 14” (350 mm) are fabricated from...

7130 Grooved 45° Lateral Shurjoint grooved-end fittings are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. Shurjoint standard fitting pressure ratings conform to the...

7135 Grooved Cross Shurjoint grooved-end fittings are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. Shurjoint standard fitting pressure ratings conform to the ratings of...

7150 Grooved Concentric Reducer Shurjoint grooved-end reducers are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. For sizes larger than 14” (350 mm) are fabricated...

7150F Grooved Reducing Socket Adapter The Shurjoint Models 7150F & 7150M are designed for making direct reduction from a grooved system to female or male threaded system without the need for expensive swaged nipples. Shurjoint ductile iron...

7150M Grooved-End Reducing Nipple The Shurjoint Models 7150F & 7150M are designed for making direct reduction from a grooved system to female or male threaded system without the need for expensive swaged nipples. Shurjoint ductile iron grooved-end...

7151 Grooved Eccentric Reducer Shurjoint grooved-end reducers are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. For sizes larger than 14” (350 mm) are fabricated...

7160 Grooved End Cap Shurjoint grooved-end fittings are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. 7160 Cap Submittal Sheet PDF Shurjoint Technical Data PDF Shurjoint...

7160H Grooved Domed End Cap Shurjoint grooved-end fittings are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. 7160 Cap Submittal Sheet PDF Shurjoint Technical Data PDF...

7160T Grooved Transition Cap The Model 7160T grooved x threaded transition fitting can be the ideal fitting when transitioning from a larger grooved pipe to a smaller threaded pipe such as 6" x 1", 4" x 1" etc. The 7160T can be used as an alternative to...

7180 Universal Flange Adapter The Model 7180 Universal Flange Adapter provides all the benefits of our popular #7170 Flange Adapter with the added benefit of mating to a range of flange types including ANSI 125/150, PN10, PN16, JIS 10K and BS- 10E...

7181 Universal Reducing Flange Adapter The Model 7181 Universal Reducing Flange Adapter provides for a rigid transition between a flanged piping system and a one or two-size reduced grooved system without the use of a concentric reducer. The flange...

74 Slidelok® Ready for Installation Coupling The SlideLOK® coupling is the most rigid ready for installation coupling designed to reduce installation time. The slide action eases assembly and reduces installation time. The patented gasket...

7401SS Stainless Steel Rigid Coupling 316SS The Figure 7401SS Rigid Coupling is a Stainless Steel coupling made of ASTM A-743/A743M cast Stainless Steel which is the cast equivalent to 316 Stainless Steel. It is designed for installation on grooved...

Model 7705 Flexible Coupling The Shurjoint Model 7705 is a standard flexible coupling designed for use in a variety of moderate pressure general piping applications. The Model 7705 coupling features flexibility that can accommodate misalignment,...

7706 Heavy Reducing Coupling The Model 7706 Reducing Coupling allows direct reduction on a piping run and eliminates the need for a concentric reducer and couplings. The specially designed rubber gasket prevents the smaller pipe from telescoping into the...

7707 Heavy Duty Flexible Coupling The Model 7707 Flexible Coupling is designed for use in a variety of general piping applications ofmoderate or high pressure services. Working pressure is usually dictated by the wall thickness and rating of the pipe...

7721 Mechanical Tee Female Threaded Outlet The Model 7721 Mechanical Tee when mounted on hole cut pipe provides a fast and easy mid-pipe threaded branch outlet. By utilizing the Model 7721 you eliminate the need for welding or the use of multiple...

7722 Mechanical Tee Grooved-End Outlet The Model 7721 Mechanical Tee when mounted on hole cut pipe provides a fast and easy mid-pipe threaded branch outlet. By utilizing the Model 7721 you eliminate the need for welding or the use of multiple fittings...

90° Grooved Elbow - Regular Radius Shurjoint grooved-end elbows are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. Shurjoint standard fitting pressure ratings conform...

C-7 Outlet Coupling The Model C-7 Outlet Coupling combines the features of a coupling and a reducing outlet. The C-7 is a joining device with an integral reducing outlet, eliminating the need for a mechanical tee or a reducing tee and couplings. The C-7...

150 PER BOX 105# Grooved on the large end and reduced size female NPT threaded on the small end. Ductile Iron construction. Non-lead orange paint Conforms to ASTM A536 All sizes are UL, ULC listed and FM approved for 300 PSI working pressure. ...

Fire Protection Grooved Butterfly Valve Fire Protection Butterfly Valve Groove UL Listed, FM Approved Design Standard:  API609 Connection Ends: Groove to AWWA C606 Top Flange Standard: ISO 5211 Stem drive by keys, parallel or diagonal square of...

Fire Protection Grooved Check Valve Compact, cost effective valve, designed for use in grooved-end pipe fire protection systems. Working Pressure : 300 PSI Max. Test Presure : 500 PSI Max. Working Temp. : 212°F UL Listed/FM Approved NSF 61 certified...

Swing Check Valve Shotgun Model RCV 2" Groove x Groove As an alternative to using an alarm check valve with a wet sprinkler system, an RCV Swing Check Valve may be used in a "Shotgun" arrangement whereby the valve is trimmed...

G28 Hinged Lever Coupling The Model G28 Hinged Grooved Coupling is designed for quick connect and disconnect services. The housing segments are hinged with a lever handle for easy assembly. The use of the split pin can secure and prevent the accidental...

Galvanized Rigid Couplings 60° angle pad design Resists flexural and torsion load Listed pressure is maximum working pressure; for the fire protection application, approved pressure by related authorities should be used: UL/ULC: 300PSI FM: 300PSI...

Grooved 11.25° Degree Elbow Ductile Iron construction. Non-lead orange paint Conforms to ASTM A536 UL listed, FM Approved 11.25° Elbow Data Sheet PDF Grooved Catalog PDF

Grooved 22-1/2° Elbow Standard Radius Ductile Iron - Full Flow UL/FM - 1-1/4" to 12" only Downloads Grooved Catalog PDF Grooved Cross Reference PDF

Grooved 22.5° Degree Elbow Ductile Iron construction. Non-lead orange paint Conforms to ASTM A536 UL listed, FM Approved 22.5° Degree Elbow Data Sheet PDF Grooved Catalog PDF