Specialties

1" Basin/ Lavatory Crumb Cup Made of stainless steel. 3/4″ deep. Removable.  

1" Brass Water Saver Shower Head Less Volume Control- Chrome Plated (2.0 to 2.5 GPM) 2″ FIP Connection. Meets ANSI A112-18-IM 1979. Adjustable spray. 2.0 GPM @ 80 PSI  

1" Brass Water Saver Shower Head w/ Volume Control- Chrome Plated 1/2″ FIP Connection. Meets ANSI A112-18-IM 1979. Adjustable Spray 1.80 GPM @ 80 PSI  

1" x 3/4" Brass Urinal Spud For urinal. Brass body & locknut w/ rubber washer and galvanized friction ring.  

1" x 5' Aluminum Angled Shower Rod 1″ OUTSIDE DIAMETER X 5′ LENGTH. MADE OF ALUMINUM.  

1" x 5' Curved Shower Rod w/ Flanges- Brushed Stainless Steel 44″ to 72″ length. Adds up to 9″ more room. 22 Gauge.  

1" x 5' Curved Shower Rod w/ Flanges- Chrome Plated. Hardware Included. ADDS UP TO 9″ MORE ROOM/ 22 GAUGE  

1" x 6' ALUMINUM ANGLED SHOWER ROD 1″ OUTSIDE DIAMETER X 6′ LENGTH. MADE OF ALUMINUM.  

1-1/2" Bath Drain Trim Less Stopper CHROME PLATED BRASS. 11-1/2 THREADS. (COARSE)  

1-1/2" Brass Closet Spud Brass body and locknut with rubber washer and galvanized friction ring.  

1-1/2" Gerber Style Bath Drain w/ Strainer- Chrome Plated 1-1/2″ COARSE THREAD. FINISHED STRAINER AND SCREW.  

1-1/2" Lift/ Turn Tub Drain- Chrome Plated Chrome plated zinc die cast. 11-1/2 tpi coarse threads.  

1-1/2" MPT x 1-1/4" FPT (1-3/8") Brass Tub Drain Conversion Bushing Converts 1-1/4″ (1-3/8″) tub drain to 1-1/2″ coarse threads  

1-1/2" S.J. x 1-1/2" FSWT Marvel Adapter 1-1/2″ Slip Joint x 1-1/2″ Female Sweat marvel adapter. Used on closet/urinal stub-out adapter  

1-1/2" Sewer Relief Valve DESIGNED FOR USE IN OUTSIDE CLEANOUTS TO ELIMINATE COSTLY DAMAGE DUE TO SEWAGE BACK-UP. FITS 1-1/2″ CAST IRON OR PLASTIC PIPES. PROVIDES A VISIBLE WARNING THAT SEWAGE IS BACKING UP. SPRING LOADED TO AUTOMATICALLY CLOSE,...

1-1/2" Sink Crumb Cup Less Post STAINLESS STEEL  

1-1/2" Sink Crumb Cup w/ Post Made of stainless steel. 3/4″ deep. Removable.  

1-1/2" Split (2pc) Plastic Slip Joint Nut FITS 1-1/2″ TUBULAR. WHITE PVC. NUT CAN BE REPLACED WITHOUT REMOVING TUBULAR!!  

1-1/2" Toe Touch Drain (11-1/2" Coarse Threads) CHROME PLATED ZINC BODY. 11-1/2 THREADS. (COARSE) COMPLETE W/ WASHER  

1-1/2" TRAP AIR VENT

1-1/2" x 1-1/4" Brass Closet Spud Brass body and locknut with rubber washer and galvanized friction ring.  

1-1/2" x 12" Stainless Steel Grab Bar w/ Concealed Screws 12″ length, 18 gauge, 304 grade stainless steel, 1-1/2″ tube. Meets 900lb downward pull with proper installation. Meets federal specification: WW-P-541/8B, Amendemnt 1, 16 April 1990...

1-1/2" x 12" Stainless Steel Grab Bar w/ Exposed Screws 12″ length, 18 gauge, 304 grade stainless steel, 1-1/2″ tube. Meets 900lb downward pull with proper installation. Meets federal specification: WW-P-541/8B, Amendemnt 1, 16 April 1990...

1-1/2" X 16" S.S. Grab Bar w/ Concealed Screws 16″ length, 18 gauge, 304 grade stainless steel, 1-1/2″ tube. Meets 900lb downward pull with proper installation. Meets federal specification: WW-P-541/8B, Amendemnt 1, 16 April 1990. Meets ANSI...

1-1/2" X 18" Stainless Steel Grab Bar w/ Concealed Screws 18″ length, 18 gauge, 304 grade stainless steel, 1-1/2″ tube. Meets 900lb downward pull with proper installation. Meets federal specification: WW-P-541/8B, Amendemnt 1, 16 April 1990...

1-1/2" x 18" Stainless Steel Grab Bar w/ Exposed Screws 18″ length, 18 gauge, 304 grade stainless steel, 1-1/2″ tube. Meets 900lb downward pull with proper installation. Meets federal specification: WW-P-541/8B, Amendemnt 1, 16 April 1990...

1-1/2" x 24" Stainless Steel Grab Bar w/ Concealed Screws 24″ length, 18 gauge, 304 grade stainless steel, 1-1/2″ tube. Meets 900lb downward pull with proper installation. Meets federal specification: WW-P-541/8B, Amendemnt 1, 16 April 1990...

1-1/2" x 24" Stainless Steel Grab Bar w/ Exposed Screws 24″ length, 18 gauge, 304 grade stainless steel, 1-1/2″ tube. Meets 900lb downward pull with proper installation. Meets federal specification: WW-P-541/8B, Amendemnt 1, 16 April 1990...

1-1/2" x 3/4" Brass Urinal Spud For urinal. Brass body & locknut w/ rubber washer and galvanized friction ring.  

1-1/2" x 30" Stainless Steel Grab Bar w/ Concealed Screws 30″ length, 18 gauge, 304 grade stainless steel, 1-1/2″ tube. Meets 900lb downward pull with proper installation. Meets federal specification: WW-P-541/8B, Amendemnt 1, 16 April 1990...

1-1/2" x 30" Stainless Steel Grab Bar w/ Exposed Screws 30″ length, 18 gauge, 304 grade stainless steel, 1-1/2″ tube. Meets 900lb downward pull with proper installation. Meets federal specification: WW-P-541/8B, Amendemnt 1, 16 April 1990...

1-1/2" x 32" Stainless Steel Grab Bar w/ Concealed Screws 32″ length, 18 gauge, 304 grade stainless steel, 1-1/2″ tube. Meets 900lb downward pull with proper installation. Meets federal specification: WW-P-541/8B, Amendemnt 1, 16 April 1990...

1-1/2" x 36" Stainless Steel Grab Bar w/ Concealed Screws 36″ length, 18 gauge, 304 grade stainless steel, 1-1/2″ tube. Meets 900lb downward pull with proper installation. Meets federal specification: WW-P-541/8B, Amendemnt 1, 16 April 1990...

1-1/2" x 36" Stainless Steel Grab Bar w/ Exposed Screws 36″ length, 18 gauge, 304 grade stainless steel, 1-1/2″ tube. Meets 900lb downward pull with proper installation. Meets federal specification: WW-P-541/8B, Amendemnt 1, 16 April 1990...

1-1/2" x 42" Stainless Steel Grab Bar w/ Concealed Screws 42″ length, 18 gauge, 304 grade stainless steel, 1-1/2″ tube. Meets 900lb downward pull with proper installation. Meets federal specification: WW-P-541/8B, Amendemnt 1, 16 April 1990...

1-1/2" x 42" Stainless Steel Grab Bar w/ Exposed Screws 42″ length, 18 gauge, 304 grade stainless steel, 1-1/2″ tube. Meets 900lb downward pull with proper installation. Meets federal specification: WW-P-541/8B, Amendemnt 1, 16 April 1990...

1-1/2" x 48" Stainless Steel Grab Bar w/ Concealed Screws 48″ length, 18 gauge, 304 grade stainless steel, 1-1/2″ tube. Meets 900lb downward pull with proper installation. Meets federal specification: WW-P-541/8B, Amendemnt 1, 16 April 1990...

1-1/2" x 48" Stainless Steel Grab Bar w/ Exposed Screws 48″ length, 18 gauge, 304 grade stainless steel, 1-1/2″ tube. Meets 900lb downward pull with proper installation. Meets federal specification: WW-P-541/8B, Amendemnt 1, 16 April 1990...

1-1/2" x 5" Flush Valve Pipe Support - Chrome Plated Brass

1-1/4 x 18" Stainless Steel Grab Bar w/ Concealed Screws 18″ length, 18 gauge, 304 grade stainless steel, 1-1/2″ tube. Meets 900lb downward pull with proper installation. Meets federal specification: WW-P-541/8B, Amendemnt 1, 16 April 1990...