Test Caps and Plugs

1-1/2" 5" Galvanized Mechanical Test Plugs Galvanized Steel Flanges with Molded Rubber Gaskets. Fits both cast iron and PVC pipe. Fits minimum pipe ID 1.44″ and maximum pipe ID 1.65. Maximum back pressure water head is 5 feet Maximum back pressure...

1-1/2" Heavy Plastic Test Plug with Metal Bolt and Wing Nut WITH METAL BOLT AND WING NUT. HEAVY PLASTIC FLANGES WITH MOLDED RUBBER GASKETS. FITS BOTH CAST IRON AND PVC PIPE.  

1-1/2" T-cone Cleanout Repair Plug FITS 1-1/2″ PIPE. REPAIRS DAMAGED PIPE THREADS.  

1-1/2" T-cone Test Plug COMBINATION CLEANOUT AND TEST PLUG. NO METAL PARTS TO RUST. TESTS UP TO 3 STORIES OF HEAD PRESSURE. POSITIVE SEALING. U.S. PATENT #4,506,705.  

2" Flexible Heavy Duty Test Cap Fits 2″ DWV pipe. Can be used on cast iron, PVC, ABS, steel pipe. Meets UPC, BOCA, CSA, Southern Building Code and other building codes. EPDM material with 300 series stainless steel clamp.  

2" Galvanized Mechanical Test Plugs Galvanized Steel Flanges with Molded Rubber Gaskets. Fits both cast iron and PVC pipe. Fits minimum pipe ID 1.96″ and maximum pipe ID 2.25″. Maximum back pressure water head is 5 feet Maximum back pressure...

2" Heavy Plastic Test Plug with Metal Bolt and Wing Nut WITH METAL BOLT AND WING NUT. HEAVY PLASTIC FLANGES WITH MOLDED RUBBER GASKETS. FITS BOTH CAST IRON AND PVC PIPE.  

2" Pneumatic Clean-out Test Tee Plug Designed for testing plumbing lines above the cleanout tee. Design of plug will allow for passing of test water or air by deflating the plug. Threads directly into test tee. Threads into both cast iron and plastic...

2" T-cone Cleanout Repair Plug EASILY REPAIRS DAMAGED OR CORRODED METAL OR PLASTIC CLEANOUT THREADS.  

2" T-cone Test Plug COMBINATION CLEANOUT AND TEST PLUG. NO METAL PARTS TO RUST. TESTS UP TO 3 STORIES OF HEAD PRESSURE. POSITIVE SEALING. U.S. PATENT #4,506,705.  

2" TO 3" INFLATABLE LONG WATER/ AIR TEST PLUG FITS 2″ TO 3″ PIPES. DESIGNED WITH 2 STAGE DEFLATION, ALLOWING ACCESS PIPE TO REMAIN SEALED WHILE WATER CLEARS DRAIN LINE. INCLUDES 48″ AIR HOSE.  

2' Pneumatic Extension Hose

3" Galvanized Mechanical Test Plugs Galvanized Steel Flanges with Molded Rubber Gaskets. Fits both cast iron and PVC pipe. Fits minimum pipe ID 2.86″ and maximum pipe ID 3.25″. Maximum back pressure water head is 5 feet Maximum back pressure...

3" Heavy Plastic Test Plug with Metal Bolt and Wing Nut WITH METAL BOLT AND WING NUT. HEAVY PLASTIC FLANGES WITH MOLDED RUBBER GASKETS. FITS BOTH CAST IRON AND PVC PIPE.  

3" Pneumatic Clean-out Test Tee Plug Designed for testing plumbing lines above the cleanout tee. Design of plug will allow for passing of test water or air by deflating the plug. Threads directly into test tee. Threads into both cast iron and plastic...

3" T-cone Test Plug COMBINATION CLEANOUT AND TEST PLUG. NO METAL PARTS TO RUST. TESTS UP TO 3 STORIES OF HEAD PRESSURE. POSITIVE SEALING. U.S. PATENT #4,506,705.  

3" TO 4" INFLATABLE LONG WATER/ AIR TEST PLUG FITS 3″ TO 4″ PIPES. DESIGNED WITH 2 STAGE DEFLATION, ALLOWING ACCESS PIPE TO REMAIN SEALED WHILE WATER CLEARS DRAIN LINE. INCLUDES 48″ AIR HOSE.  

3"- 4" Inflatable Water/ Air Test Plug FITS 3″ AND 4″ PIPES. FOR PRESSURE TESTING DRAIN LINES. USER SAFE: PRE-SET PRESSURE RELIEF VALVE PREVENTS OVER-INFLATION. HOLDING POWER: MULTI-RIBBED BODY CREATES TIGHT EFFECTIVE SEAL. VERSATILE PLUG...

4" - 6" Inflatable Water/ Air Test Plug FITS 4″, 5″ AND 6″ PIPES. FOR PRESSURE TESTING DRAIN LINES. USER SAFE: PRE-SET PRESSURE RELIEF VALVE PREVENTS OVER-INFLATION. HOLDING POWER: MULTI-RIBBED BODY CREATES TIGHT EFFECTIVE SEAL...

4" Galvanized Mechanical Test Plugs Galvanized Steel Flanges with Molded Rubber Gaskets. Fits both cast iron and PVC pipe. Fits minimum pipe ID 3.78″ and maximum pipe ID 4.5″. Maximum back pressure water head is 5 feet Maximum back pressure...

4" Heavy Plastic Test Plug with Metal Bolt and Wing Nut WITH METAL BOLT AND WING NUT. HEAVY PLASTIC FLANGES WITH MOLDED RUBBER GASKETS. FITS BOTH CAST IRON AND PVC PIPE.  

4" Pneumatic Clean-out Test Tee Plug Designed for testing plumbing lines above the cleanout tee. Design of plug will allow for passing of test water or air by deflating the plug. Threads directly into test tee. Threads into both cast iron and plastic...

4" T-cone Test Plug COMBINATION CLEANOUT AND TEST PLUG. NO METAL PARTS TO RUST. TESTS UP TO 3 STORIES OF HEAD PRESSURE. POSITIVE SEALING. U.S. PATENT #4,506,705.  

5" Heavy Plastic Test Plug with Metal Bolt and Wing Nut WITH METAL BOLT AND WING NUT. HEAVY PLASTIC FLANGES WITH MOLDED RUBBER GASKETS. FITS BOTH CAST IRON AND PVC PIPE.  

5"-8" Inflatable Water/ Air Test Plug FITS 5″, 6″AND 8″ PIPES. FOR PRESSURE TESTING DRAIN LINES. USER SAFE: PRE-SET PRESSURE RELIEF VALVE PREVENTS OVER-INFLATION. HOLDING POWER: MULTI-RIBBED BODY CREATES TIGHT EFFECTIVE SEAL. VERSATILE...

6" Galvanized Mechanical Test Plugs Galvanized Steel Flanges with Molded Rubber Gaskets. Fits both cast iron and PVC pipe. Fits minimum pipe ID 5.62″ and maximum pipe ID 6.4″. Maximum back pressure water head is 5 feet Maximum back pressure...

6" Heavy Plastic Test Plug w/ Metal Bolt & Wing Nut WITH METAL BOLT AND WING NUT. HEAVY PLASTIC FLANGES WITH MOLDED RUBBER GASKETS. FITS BOTH CAST IRON AND PVC PIPE.