Drains

2" All PVC Snap-in Drain Fits 2″ Schedule 40 DWV pipe. Comes with stainless steel strainer. May be solvent welded or just inserted inside of pipe. Allows for cutting drain pipe flush with the floor. May be used as a strainer for vent stack or air...

2" Brass No-Caulk Shower Drain w/ Key Fits 2″ pipe. Solid cast brass body with black rubber gasket, Black rubber washer, 4-1/4″ OD 304 grade stainless steel snap-in strainer and key. Use key to tighten gasket around pipe.  

2" Brass Spud w/ 4" Square Cast Screw-in Strainer- Brushed Brass Strainer Strainer OD is 3-7/8″ x 3-7/8″ OD. Grouting ring is 4-5/16″ x 4-5/16″ OD. 3-1/4″ screw hole to screw hole distance. Comes w/ heavy cast brass spud w/...

2" Brass Spud w/ 4" Square Cast Screw-in Strainer- Chrome Plated Strainer OD is 3-7/8″ x 3-7/8″ OD. Grouting ring is 4-5/16″ x 4-5/16″ OD. 3-1/4″ screw hole to screw hole distance. Comes w/ heavy cast brass spud w/ grout...

2" Cast Iron Trap Standard w/ Stainless Steel Strainer 2″ PIPE SIZE. STAINLESS STEEL STRAINER. FITS KOHLER, AMERICAN STANDARD, ELJER AND CRANE CAST IRON SERVICE SINKS. ADJUSTABLE.  

2" FIP Cast Brass Shower Drain w/ S.S. Grid Strainer Comes with cast brass body with stamped stainless steel strainer.  

2" Hub PVC Floor Sink Base Only (less strainer/grate)

2" Hub PVC Floor Sink w/ 3/4" Grate Dome Strainer

2" Hub PVC Floor Sink w/ 3/4" Grate Flat Strainer

2" Hub PVC Floor Sink w/ Full Grate Dome Strainer

2" Hub PVC Floor Sink w/ Full Grate Flat Strainer

2" Inside Caulk Cast Brass Floor Drain w/ S.S. Stamped Strainer FOR USE IN AREAS WHERE A PAN LINER IS NOT REQUIRED. COMES WITH A STAINLESS STEEL SCREW IN STRAINER.  

2" Inside Caulk Cast Brass Shower Drain w/ Snap-in Strainer WITHOUT GASKET. FITS 2″ CAST IRON AND SCHEDULE 40 PIPE. COMES WITH 4-1/4″ OD STAINLESS STEEL SNAP IN STRAINER. FOR USE WITH FIBERGLASS OR ACRYLIC SHOWERS.  

2" Inside Caulk Cast Iron Bolt Down Drain w/ S.S. Strainer 2″ INSIDE CAULK CONNECTION . 6-1/2″ DIAMETER PAN. CAST IRON BOLT DOWN CLAMP RING FOR USE WITH NON LEAD PAN LINER. CLAMP RING HAS SEEPAGE GROOVES ON THE UNDERSIDE. INSIDE CAULK UNIT...

2" Inside Caulk Cast Iron Bolt Down Shower Drain w/ Cast Strainer- Chrome Plated 2″ INSIDE CAULK CONNECTION. 6-1/2″ DIAMETER PAN. CAST IRON BOLT DOWN CLAMP RING FOR USE WITH NON LEAD PAN LINER. CLAMP RING HAS SEEPAGE GROOVES ON THE UNDERSIDE...

2" Inside Caulk Cast Iron Shower Drain w/ Clamping Ring Cast Strainer 2″ Inside Caulk connection. Comes with brass threaded clamping ring, 7″ pan w/ chrome plated brass spud and stamped stainless steel strainer.  

2" IPS BRASS URINAL DRAIN WITH CHROME PLATED STRAINER 4-1/4″ OD  

2" IPS Cast Brass Shower Drain w/ Stainless Strainer Designed for use with prefab/fiberglass shower stalls. Comes with 4-1/4″ OD snap-in stainless steel strainer. Fits 2″ Iron Pipe Threads. A gasket can be used to make a no-caulk connection...

2" IPS Cast Iron Bolt Down Drain w/ S.S. Strainer FITS 2″ IRON PIPE SIZE. 6-1/2″ DIAMETER PAN. CAST IRON BOLT DOWN CLAMP RING FOR USE WITH NON LEAD PAN LINER. CLAMP RING HAS SEEPAGE GROOVES ON THE UNDERSIDE. INSIDE CAULK UNIT MAY BE USED...

2" IPS Cast Iron Bolt Down Drainer w/ Chrome Plated Cast Strainer Fits 2″ iron pipe size 6-1/2″ diameter pan. Cast iron bolt down clamp ring. For use with non-lead pan liner. Clamp ring has seepage grooves on the underside. Comes with chrome...

2" IPS Cast Iron Shower Drain w/ Threaded Brass Clamping Ring Cast Strainer 2″ Iron Pipe Size. Comes with brass threaded clamping ring, 7″ pan w/ chrome plated brass spud and stamped stainless steel strainer.  

2" MPT Backwater Device for Floor Drains- Plastic Body BALL INCLUDED-SLEEVE TYPE  

2" No Caulk (MJ) Cast Iron Drain Base for 3-1/2" Spud (7" Pan) 2″ No Caulk mechanical joint connection. 7″ Pan diameter. 1/2″ primer tapped. Stainless steel bolts. Test plug included. Fits 3-1/2″ spud. With clamping ring.  

2" No Hub Cast Iron Bolt Down Drain w/ Cast Chrome Plated Strainer 2″ NO HUB CONNECTION. 6-1/2″ DIAMETER PAN. CAST IRON BOLT DOWN CLAMP RING FOR USE WITH NON LEAD PAN LINER. CLAMP RING HAS SEEPAGE GROOVES ON THE UNDERSIDE. COMES WITH CHROME...

2" No Hub Cast Iron Bolt Down Drain w/ S.S. Strainer 2″ NO HUB CONNECTION. 6-1/2″ DIAMETER PAN. CAST IRON BOLT DOWN CLAMP RING FOR USE WITH NON LEAD PAN LINER. CLAMP RING HAS SEEPAGE GROOVES ON THE UNDERSIDE. COMES WITH STAINLESS STEEL...

2" No Hub Cast Iron Drain Base for 3-1/2" Spud (7" Pan) 2″ No Hub connection. 7″ pan diameter. 1/2″ primer tapped. Stainless steel bolts. Fits 3-1/2″ spud. With clamping ring.  

2" No Hub Cast Iron Shower Drain w/ Clamping Ring Cast Strainer 2″ No Hub connection. Comes with brass threaded clamping ring, 7″ pan w/ chrome plated brass spud and stamped stainless steel strainer.  

2" No Hub Cast Iron Slab Drain Base for 3-1/2" Spud (7" Pan) 2″ No Hub connection. 7″ pan diameter. 1/2″ primer tapped w/ brass plug. Stainless steel bolts. Fits 3-1/2″ spud. Less clamping ring.  

2" No-hub Cast Iron White Porcelain Floor Sink Less Grate 12″Lx12″Wx6″D. White porcelain coated cast iron. Aluminum dome bottom strainer included.  

2" Offset Fiberglass Shower Stall Drain WHITE PVC. FITS 2″ DWV PIPE.  

2" PVC Floor Drain and Trap w/ Cleanout Solvent weld 2″ DWV connection. 1-1/2″ concealed cleanout 1-1/2″ plug. Drain includes PVC strainer.  

2" PVC No-Caulk Shower Drain w/ Stainless Steel Snap-in Strainer Compression gasket type. No glue necessary. Quick installation. Designed for fiberglass shower stalls. Fits schedule 40 plastic or cast iron pipe. 4-1/4″ stainless steel snap-in...

2" PVC Shower Stall Drain w/ Receptor Base -Stainless Steel Strainer Fits 2″ DWV Pipe w/ 4-1/4″ outside diameter 2-5/8″ Screw hole to screw hole. Fits all standard fiberglass / acrylic shower stall base. Polished stainless steel...

2" PVC Solvent Weld Shower Stall Drain w/ S.S. Strainer 2″ DWV pipe solvent weld connection. Fits all standard fiberglass/ acrylic shower stall bases.  

2" Snap-in Drain Cover- Stainless Steel Fits 2″ Pipe. 3-1/8″ outside diameter. Heavy duty. Covers all cast iron, clay, tile and plastic pipe drains. Plastic pipe drains. Ideal for swimming pool drains.  

2" STRAINER FOR HUB OPENINGS IN SOIL PIPE 2-3/4″ DIAMETER  

2" X 3" Heavy Duty PVC Floor/ Shower Drain w/ S.S. Strainer FITS OUTSIDE 2″ AND INSIDE 3″ SCHEDULE 40 DWV PIPE. SOLVENT WELD CONNECTION. 4-1/4″ OUTSIDE DIAMETER STAINLESS STEEL STRAINER. 2″ TAILPIECE ALLOWS ADJUSTMENT TO DESIRED...

2" X 3" PVC (Grey) Low Profile Bolt Down Shower Drain w/ Round S. S. Strainer Grey in color. Fits Outside 2″ & Inside 3″ Schedule 40 DWV Pipe. Solvent Weld Connection. 4-1/4″ Outside Diameter PVD Stainless Steel Strainer. 2″...

2" x 3" PVC General Purpose Drain w/ S.S. Strainer FITS OUTSIDE 2″ AND INSIDE 3″ SCHEDULE 40 DWV PIPE. FOR GENERAL PURPOSE DRAIN REQUIREMENTS WHERE CLAMPING OF A WATERPROOF MEMBRANE IS NOT REQUIRED. COMES WITH STAINLESS STEEL STRAINER. ...

2" x 3" PVC General Purpose Long Body Drain w/ 4-1/4" Stamped Stainless Steel Round Stamped Strainer