Hangers & Seismic

Model 906 Side Beam Angle Bracket 3/8" UNC Low Carbon Steel with Electro-Galvanized Finish UL Listed Click here for Technical Data (PDF)

Top Beam Clamp 3/8" rod size Malleable iron with hardened steel cup point set screw & lock nut. Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 3/4 inch. ...

Designed to be used with all 3/8" square head set screws as used with all beam clamps, c-clamps and purlin clamps. Click here for Technical Data (PDF) Click here for Technical Data

Model 360 Wide Throat Beam Clamp 3/8" rod size Malleable iron, includes lock nut Click here for Technical Data Click here for Technical Data

Designed to chase damaged 3/8" hanger rod threads Quickly chase the damaged thread after cutting rod with a saw or bolt cutter End of the handle is concave of the stud point for use as a ram rod to insert threaded studs into a...

Standard Clevis Hanger (Electro-Galvanized Finish) UL Listed, FM Approved For suspension of non-insulated stationary pipe lines Low carbon steel construction Conforms with Federal Specification WW-H-171 (Type...

CPVC One-Hole Wrap Around Strap 100 PER CASE Designed to support pipe running horizontally on the side of a beam. Install with hanger tabs upward only. Can also be used AS A GUIDE ONLY to limit movement of vertical CPVC...

CPVC 90° Sidemount Two-Hole Strap 100 PER BOX 9 LBS Top or bottom beam installation Can be used as a restrainer from upward movement of the sprinkler head Galvanized steel, supplied with hex screws UL Listed. File VIXH.EX6587 Cross References: TOLCO...

CPVC Standoff No-Block 2 Hole Strap For mounting CPVC pipe to wood Flared edges help protect CPVC Galvanized steel Supplied with #10 hex head cap screws Complies with the static load requirements of NFPA® 13 ...

CPVC 2 Hole Strap 3/4" Horizontal or vertical position Used at side or bottom of beam Galvanized steel, supplied with hex slotted screwsCross Reference: Tolco Fig 23 UL Listed. File VIXH.EX6587 ...

20 pc inner box / 100 pc master boxThreaded Rod Fastener for ConcreteBottom mount - 3/8" thread x 1/4" shank x 1-1/2" longOne piece self-tapping for use in concreteFM, ICC ListedUse Concrete Drive Socket 2530313V-SOCKETClick here for...

1/4-20 diameter shank x 1-1/2" length with #5 nutSide Mount3/8" Threaded RodDriver No:PFM2201200Minimum Thickness:0.125"Maximum Thickness:0.210"Max Pipe Size: 4"UL Listed, FM ApprovedClick here for Technical Data

1/4-20 diameter shank x 1-1/2" length with #5 nutBottom Mount3/8" Threaded RodDriver No:PFM2201200Minimum Thickness:0.125"Maximum Thickness:0.5"Max Pipe Size: 4"UL Listed, FM ApprovedClick here for Technical DataClick here for Sales...

(25 pcs inner box / 125 pcs master box) 3/8" rod 1/4 x 1" shank length Self drilling and threading into wood No pre-drilling required. Made in the U.S.A. UL Listed Click here for Technical...

100 pc inner box / 500 pc master box Threaded Rod Fastener for Wood - Side Mount 3/8" rod x 1/4" shank x 1" length One Piece Construction Self drilling and threading into wood No predrilling required ...

Hanger & surge restraint for horizontal CPVC piping when installed on the side of supporting structure. For mounting CPVC pipe to wood Flared edges help protect CPVC Galvanized steel construction Supplied with #10 hex head...

Model 037 Steel Eye Socket - 3/8" 3/8" hole for lag screw and two additional 1/4" screw holes Size Range: 3/8" rod size Finish: Electro-Galvanized Structural attachment used to join hanger rod to a structure. ...

Purlin Clamp (Malleable Iron-Plain)(Cross Reference PHD Model 290)3/8"" rod sizeAlso available zinc platedStructural attachment to lower flange of metal beams or purlins with 45° flanges up to 2"" long and 90° flanges up to 1-1/2"" highSet screw...

UL AND FM APPROVED 200 PER BOX 20 LBS For fire sprinkler and other commercial piping Knurled swivel nut (3/8")design permits vertical hanger adjustment after installation. Zinc Plated steel construction Rubber...

Model 551 Riser Clamp (Galvanized) Function: Designed for supporting and stabilizing vertical pipe runs. Clamp is designed for standard iron pipe O.D. and must be considered when sizing other types of piping. Material: Low...

Model 550 Riser Clamp Function: Designed for supporting and stabilizing vertical pipe runs. Clamp is designed for standard iron pipe O.D. and must be considered when sizing other types of piping. Material: Low carbon steel ...

White plastic rod button Injection molded plastic 3/8" inner diameter x 1/2" height x 1-51/64" Outer diameter Recommended for giving a finished appearance where threaded rod enters ceiling (100 per case) Click...

Sammy® CST 2 for Concrete. Made with The Original Tapcon®. 1/2" ROD 5/16" x 1 1-1/2" shank length 1/4" pre-drilled pilot hole required. Install with Sammy #14 (Black) Nut Driver Made in the U.S.A. Click here for Technical Data Minimum Purchase 1...

SXP 3.5 for 1/2" Rod Structural attachment for installation of branch/end of line restraint using 1/2" all thread (.405" OD) or end thread rod (.500" OD). Designed for use in steel purlin ranging from 16 ga. through 1/8" in low...

Sammy Sidewinder® SWDR 1 w/ retaining nut for Steel.Made with Teks® self-drilling fasteners3/8" ROD 1/4-20 x 1 TEKS 3 shank lengthNo pre-drilling required.Minimum Thickness: .036" - 20 ga.Maximum Thickness: 3/16"Install with Sammy #14 SW...

Current Special: Buy 125 pcs: $0.99 each Buy 1000 pcs: $0.87 each Sammy Super Screw SWG-20 horizontal mount Self drilling and tapping into wood 3/8" rod x 2" shank length 1/4" shank diameter UL listed Use...

Sammy® GST 10 for Wood. 3/8" ROD 1/4 x 2" shank length No pre-drilling required. Install with Sammy #14 (Black) Nut Driver Made in the U.S.A. UL Listed. Click here for Technical Data Minimum Purchase 1 Box of 25 pcs ...

Model 031 Seismic Clamping Pipe Attachment Brace to Schedule 40 pipe, and can also brace to structural steel, and 12 gauge strut. Universal swivel design allows for attachment at any angle and the ability to be used in a lateral...

Model 020 Rod Swivel Attachment Used as a branch line restraint for structural attachment. Designed to be used with PHD Model 350 Beam Clamp

Model 010 Sway Brace Pipe Attachment The pipe attachment component of a sway brace system used in conjunction with a structural attachment fitting and joined together with a bracing pipe element forming a complete sway brace...

Seismic Sway Brace Pipe Attachment(Large)1"Brace, 2-1/2"Pipe(PHD 015) Function: Designed for bracing pipe against sway and seismic disturbance. The pipe attachment component of a sway brace system used in conjunction with a PHD...

Model 508 Split Ring Hanger - Hinged For suspension of non-insulated stationary pipe lines Electro-Galvanized Malleable Iron Click here for Technical Data

Split Ring Hanger Two Screw Galvanized 1/2" IPS

Affixed to the face of 2 x 4 members to protect utility pipes and to protect nails from penetrating into hidden live wires (NMC Cable ) which may be running through notches or through the drilled holes in the stud. ...

Nut driver for bottom mount and side mount threaded rod fasteners for wood. Fits all ARGCO and Sammy Screws. Click Here for TechData

Zinc Plated Wood Drive Screw (#16 x 2") For fastening light load attachments to wood beams. Installed by driving into wood with hammer. Equivalent to a nail, but has greater holding power Carbon Steel...