800-DL-AL - Dixon Cam & Groove Coupler x 150# Flange

Designed for use with liquids, consult Dixon for specific recommendations

Flange has flat face

• To make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down.
• Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter.

• Under no circumstances should cam and groove couplings be used for compressed air or steam service!
• Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F with a standard seal installed. For use at elevated temperature or other unusual operating conditions, consult Dixon.

No standard exists for the 8" fittings, and generally does not interchange with other manufacturers.

Flanges are designed to mate with #150 flange