Dixon
4PS8 - Dual-Lock P-Series Thor Interchange Hose Barb Coupler
(No reviews yet)
Write a Review
- SKU:
- 4PS8
- Availability:
- Usually Ships Within 24 Hours
- Weight:
- 0.88 LBS
*Images are for visual reference only.
Description
Details
Compatibility & Interchange Data
- Thor Finger-Lock Interchange
- Interchanges with National A type, Campbell Double-Lock and Thor PHC series couplings
Construction
- Machined components are manufactured using solid bar stock.
- Nitrile (Nitrile Rubber) seals standard
- Stainless steel retaining ring and spring maximize corrosion resistance and extend service life on the 1 piece sleeve. 2-Piece Sleeve has a phosphor bronze spring.
- Steel componentry is plated using ROHS Compliant Trivalent Chrome.
- Zinc Cast sleeve
Safety Notes
- Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer's catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to application.
- Dixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including death.
- It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
WARNING: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
