4NF8-B - Dix-Lock® N-Series Bowes Interchange Female Threaded Coupler

• Additional seal options available, contact Dixon
• 316 stainless steel available in some versions upon request, contact Dixon

• Bowes Interchange Bayonet Style
• Interchangeable with Bowes 51000-Series, National Series 'B', MacDonald Quick-Action, Campbell Single-Lock

• Machined components are manufactured using solid bar stock.
• Nitrile (Nitrile Rubber) seals standard

It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.

• Rated pressure for connected Brass Coupler & Brass Plug: 300 PSI (20 Bar) Maximum Working and 8,200 PSI (865 Bar) Burst
• Conforms to MIL-C-3486 and A-A-50431A standards