Dixon

2710806C - NPTF Male Swivel x Push-on Hose Barb

(No reviews yet) Write a Review
SKU:
2710806C
Availability:
Usually Ships Within 24 Hours
Weight:
0.10 LBS
*Images are for visual reference only.

Description

Details

Construction

  • Dryseal
  • Two piece crimped fitting with O-ring swivel

Installation

  • Assembly Instructions:
  • 1. Trim hose end with smooth square cut.
  • 2. Lubricate either push-on fitting, hose or both.
  • 3. Insert push-on fitting into hose until first barb is in hose.
  • 4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap.

Instructions

  • Disassembly instructions:
  • 1. Leaving push-on fitting in place, make a 1" cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose.
  • 2. With firm grip on hose, give a sharp downward pull to release the fitting from the hose.

Note

  • No hose clamps or ferrules are needed
  • Swivel is for assembly convenience only, not for live swivel applications

Safety Notes

  • Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only.
  • Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.

Specifications

  • Number of Barbs: 2
  • Barb Length: 1.00"
WARNING: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
View AllClose

Related Products