1BRM2-B-7 - BR-Series Pneumatic Male Threaded Coupler

Rectus 21KA, Tomco Series SC, CEJN Series 223

• Machined components are manufactured using solid brass bar stock.
• Stainless steel springs. Carbon steel balls and retaining rings.
• Machined components are plated with chrome-over-nickel plating.
• Nitrile (Nitrile Rubber) seals are standard

It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.